BACK

ST165 Body Kits and Styling 

 

 For those who like to set themselves apart, here are some things you can do to try and create your own style.

Aeroform

  This is the only kit that we know of that will bolt on to ST16x chassis without modification.  The first picture is of the complete kit.  It was originally designed to make the body of the ST162 celica more wide and aggressive.  Since the All Trac is already wide bodied, the front is the only piece of real use.  The second picture below is what the front piece would look like on your All Trac.  The front nose runs for about $299 at most import body shops.  The installation is fairly straight forward.  The idea for this kit came from the styling of the Toyota Celica IMSA GTO race car.

              

                  The original Aeroform Body Kit                                  Based on the IMSA GTO race car

                Front bumper cover installed

 

  Just for kicks, here is a picture of the original TRD body kit for the Toyota Celica.  For bit of extra change you could pick up your "new" celica with this "wild" body kit straight from the first time you drive it off the lot.  Some have expressed interest in the rear wing, but this kit or any replica is not available as far as we know.  It used to be offered by Kaminari.

Hood Vent

One of the more desirable mods that rarely happens is to have a vent in the hood.  The engine bay gets extremely hot with a combination of hot turbo plus compact spacing.  Other turbo cars have vents in the hood, but this one doesn't.  We can only assume in Toyota's haste to get this car made and out the door, they left out this and other nice features that would have been in place on a commonplace turbo car.  Here are some ideas on where you can get a vent for your ST165.  Any vent you buy is going to have to be custom installed and molded in.

ST185RC Vent

Part Number 76181-20901 ~$170US Retail, or with 25% discount ~$135

Expect a long wait to get this imported.  Contact your local Toyota dealer.

 

Erebuni

If you don't need the genuine item, erebuni has made some copy cat scoops and vents for you.

 

ST185 Copy Scoop $136

ST185RC Copy Vent $136

ST185RC Copy Vent 2 $136

EVO Copy Vent $136

Corolla Style Scoop $136

Hood Vents (Pair) $136

 

 

Supra Euro Scoop

 

While this doesn't vent air out of the engine bay, it can be used if you do a top mount air/air IC, or used to get fresh air into the engine bay while using 2 exit vents at the rear of the hood to pull out the air.  This could be effective in "moving" the hot air away from the engine and out of the vents.

 

 

76181-14900 Bulge, Hood
76182-14010 Guide, Hood Air Intake
76183-14010 Protector Hood Bulge, No 1
76184-14010 Protector Hood Bulge, No 2
76187-14010 Retainer, Hood Air Intake Guide (2)
76192-14010 Plate, Hood Bulge
93567-14512 Screws (8)
90179-06058 Nuts (4)
76186-14010 Seal, Hood Air Intake