Need help
Moderator: toayoztan
3 posts
• Page 1 of 1
Need help
Putting back my ST165 and I need help with some sensor plugs. Two of my plugs got pulled out the wires and I need help identifying wich wire goes into what pin.
First plug goes on the intake manifold. Has 2 wires. I need to know which wire goes on the left pin and which goes on the right.
First plug goes on the intake manifold. Has 2 wires. I need to know which wire goes on the left pin and which goes on the right.
Members don't see the above ad. Register now - it's free! | |
- Glitter&Doom
- Club Member
- Posts: 28
- Joined: Tue Dec 10, 2013 4:37 am
Re: Need help
Second wire comes off the harness that's close to battery location.
I believe it's a yellow wire with a green stripe. Single wire. I don't know what or where it plugs into. Any help is greatly appreciated.
I believe it's a yellow wire with a green stripe. Single wire. I don't know what or where it plugs into. Any help is greatly appreciated.
- Glitter&Doom
- Club Member
- Posts: 28
- Joined: Tue Dec 10, 2013 4:37 am
Re: Need help
http://bgbonline.celicatech.com/88alltr ... ac_bgb.php
You can give that a try and see if you can find it in the wiring section or egr section.
Mine was pulled already when I bought the car so I can check mine. Hth!
You can give that a try and see if you can find it in the wiring section or egr section.
Mine was pulled already when I bought the car so I can check mine. Hth!
- Mr Alltrac
- Club Member
- Posts: 450
- Images: 0
- Joined: Sun Dec 01, 2013 10:35 pm
3 posts
• Page 1 of 1
Return to General Maintenance and Repair
Who is online
Users browsing this forum: No registered users and 3 guests