Parting Out ST185

All Trac Parts

Re: Parting Out ST185

Postby Kurt_st185_gt4 » Sat Dec 03, 2016 12:24 am

I'm interested in your front right wheel hub assembly. I really need just the wheel hub if you have a press available but I'm willing to buy the entire assembly. Does the car have abs? If so could you include the sensor? Shipping price shouldn't be a problem. I'm stationed in germany but my APO address will ship just like any other
US address. Zipcode 09180
Members don't see the above ad. Register now - it's free!
Kurt_st185_gt4
Club Member
 
Posts: 74
Joined: Mon Sep 05, 2016 7:50 pm
Location: Landstuhl

1990 Toyota Celica

Re: Parting Out ST185

Postby FC Zach » Sat Dec 03, 2016 2:12 pm

Well what do you have? ? ?

shogun86 wrote:The press-in inserts are still available. I don' t mid shipping the larger pieces. I'll check the condition of the panels, but I won't be next to the car by Thursday.


Then. .

shogun86 wrote:I don't have the driver side door panel insert. It was removed before I purchased the car.


and. .

shogun86 wrote:The trunk panels are in good condition and they are still available.


Then. .

shogun86 wrote:The trunk center panels are sold. . .
1992 Toyota Celica AllTrac
1987 Mazda RX7 Sport
1979 Yamaha G1A, rotary powered with Sachs KM24
1976 Hercules W2000, oil injected
User avatar
FC Zach
Club Member
 
Posts: 831
Images: 9
Joined: Mon May 20, 2013 7:43 am
Location: Eagleville, TN

1992 Toyota Celica

Re: Parting Out ST185

Postby ArmandoP » Sun Dec 04, 2016 6:27 pm

Left rear wheel speed abs sensor? I'll buy the whole hub if needed, but I really just need the sensor.
Armando Perez
2012 Tundra 565RWHP (The Daily)
1986 MR2 3SGTE "Boostmonger" 527RWHP
1988 Alltrac - just picked it up
User avatar
ArmandoP
Club Member
 
Posts: 59
Joined: Sun Oct 09, 2005 4:52 am
Location: indianapolis

Re: Parting Out ST185

Postby cozmic512 » Wed Dec 07, 2016 5:49 pm

Still waiting to hear back..
regards,
Cory
92 ST185
cozmic512
Club Member
 
Posts: 216
Joined: Fri Jan 28, 2005 4:27 pm
Location: New York, USA

Re: Parting Out ST185

Postby thedeadhp » Thu Dec 08, 2016 6:35 pm

Same here... I at least need to know if it's a possibility for me to get it. I Literally can't drive my car without a new rear left knuckle/hub... :/
1988 Camry All-Trac 3S-FE
1998 Subaru Legacy Outback EJ25D
User avatar
thedeadhp
Newbie
 
Posts: 12
Joined: Tue Nov 04, 2014 11:50 pm
Location: Yellow Springs

Re: Parting Out ST185

Postby cozmic512 » Thu Dec 08, 2016 11:33 pm

I heard back today. Seems like a good dude, maybe just busy.
I should see him within the next couple days
regards,
Cory
92 ST185
cozmic512
Club Member
 
Posts: 216
Joined: Fri Jan 28, 2005 4:27 pm
Location: New York, USA

Re: Parting Out ST185

Postby jeremykimble1 » Fri Dec 09, 2016 2:38 am

PM sent. I need both hood vents.
Let me know.
jeremykimble1
Newbie
 
Posts: 8
Joined: Sat Nov 29, 2014 4:56 am

Re: Parting Out ST185

Postby dkenned1 » Wed Dec 14, 2016 1:45 am

How about the factory battery hold down and rods?
dkenned1
Club Member
 
Posts: 26
Joined: Thu Jun 16, 2016 11:57 pm

Re: Parting Out ST185

Postby speedintb » Wed Dec 14, 2016 2:27 am

I'm going out on a limb. And ask if you will sell the engine and trans?
speedintb
Newbie
 
Posts: 9
Joined: Sun Nov 20, 2016 5:02 pm

Re: Parting Out ST185

Postby shogun86 » Wed Dec 14, 2016 12:20 pm

ArmandoP wrote:Left rear wheel speed abs sensor? I'll buy the whole hub if needed, but I really just need the sensor.


Sorry not selling the hub yet. I have to keep the car rolling until i'm ready to junk it. Won't be removing any suspension parts for months.


jeremykimble1 wrote:PM sent. I need both hood vents.
Let me know.


Sorry not for sale. I'm keeping them for my car.

dkenned1 wrote:How about the factory battery hold down and rods?


Sorry not for sale. I'm keeping them for my car.


speedintb wrote:I'm going out on a limb. And ask if you will sell the engine and trans?


Motor and transmission are both for sale.
shogun86
Club Member
 
Posts: 39
Joined: Fri Feb 12, 2016 3:44 pm

Re: Parting Out ST185

Postby thedeadhp » Wed Dec 14, 2016 12:34 pm

shogun86 wrote:
ArmandoP wrote:Left rear wheel speed abs sensor? I'll buy the whole hub if needed, but I really just need the sensor.


Sorry not selling the hub yet. I have to keep the car rolling until i'm ready to junk it. Won't be removing any suspension parts for months.


It's good to hear from you Shogun! When do you think you'll be ready to scrap the car and get those knuckles/hubs off? It's probably all snowy now, so not much fun to strip I bet.
1988 Camry All-Trac 3S-FE
1998 Subaru Legacy Outback EJ25D
User avatar
thedeadhp
Newbie
 
Posts: 12
Joined: Tue Nov 04, 2014 11:50 pm
Location: Yellow Springs

Re: Parting Out ST185

Postby shogun86 » Tue Dec 20, 2016 12:17 am

thedeadhp wrote:
shogun86 wrote:
ArmandoP wrote:Left rear wheel speed abs sensor? I'll buy the whole hub if needed, but I really just need the sensor.


Sorry not selling the hub yet. I have to keep the car rolling until i'm ready to junk it. Won't be removing any suspension parts for months.


It's good to hear from you Shogun! When do you think you'll be ready to scrap the car and get those knuckles/hubs off? It's probably all snowy now, so not much fun to strip I bet.


Most likely around March/April.
shogun86
Club Member
 
Posts: 39
Joined: Fri Feb 12, 2016 3:44 pm

Re: Parting Out ST185

Postby speedintb » Tue Dec 20, 2016 2:36 am

I know it's probably not going to be for a bit. But what are you thinking for engine and trans? Kinda looking for what I would get if I were to get a jdm swap, maybe.. idk. Up to you let me know could also come help take it out if that helps.. I'm in no hurry just curious be nice to have a spare to build over the summer. Thanks.
speedintb
Newbie
 
Posts: 9
Joined: Sun Nov 20, 2016 5:02 pm

Re: Parting Out ST185

Postby shogun86 » Tue Dec 20, 2016 3:23 am

speedintb wrote:I know it's probably not going to be for a bit. But what are you thinking for engine and trans? Kinda looking for what I would get if I were to get a jdm swap, maybe.. idk. Up to you let me know could also come help take it out if that helps.. I'm in no hurry just curious be nice to have a spare to build over the summer. Thanks.


I'm asking $700 for the complete motor and transmission.
shogun86
Club Member
 
Posts: 39
Joined: Fri Feb 12, 2016 3:44 pm

Re: Parting Out ST185

Postby CSAlltrac » Wed Dec 21, 2016 1:11 am

What would you want for the door handles?
ALLTRAC AT FIRST SIGHT
User avatar
CSAlltrac
Established Member
 
Posts: 2029
Joined: Fri May 05, 2006 1:47 pm
Location: ATX

PreviousNext

Return to Parts For Sale

Who is online

Users browsing this forum: No registered users and 1 guest