Talk about the other Celica models
Tue Oct 23, 2012 4:02 pm
clean example. very nice
Tue Oct 23, 2012 5:40 pm
Cool. Any plans beyond what you have done? Looks clean.
Tue Oct 23, 2012 6:16 pm
Now that's a awesome 6th Gen
Thu Oct 25, 2012 3:59 am
oh yeah, this is a hybrid 3MZ block with 1MZ heads and electronics. with this setup i should get past the CA BAR to make it a legal swap. once i get the certificate, ill swap in a full 3MZ with a 1MZ VVT intake manifold and dual throttle body and electronics. the VVT 1MZ is still a cable not DBW and it will run the engine no problem.
Thu Oct 25, 2012 1:06 pm
^ I was gonna ask why you went with 1M stuff on a 3MZ bottom end as everything I found says that the 3MZ makes more power and has a larger TB. So the 3MZ is DBW I assume?
Thu Oct 25, 2012 2:21 pm
Fri Oct 26, 2012 9:26 pm
underscore wrote:^ I was gonna ask why you went with 1M stuff on a 3MZ bottom end as everything I found says that the 3MZ makes more power and has a larger TB. So the 3MZ is DBW I assume?
a few reasons. yes the 3MZ is a DWB. but the main reason is to be a legal swap in California. you can only do a swap in a 5 speed that was originally a 5 speed, so leagaly only a full 1MZ (non VVT) is allowed. however because the 3MZ bottom end will work with the 1MZ heads, im sneaking in the extra .3 displacement.
Sat Oct 27, 2012 12:00 am
Ok gotcha, so I could run a full 3MZ without too much hassle. Did the 3 only come on autos or something?
Sat Oct 27, 2012 1:51 am
That's awesome dude. Way to build a bad ass car while remaining legal, that's a tough feat in Cali.
Wed Nov 07, 2012 3:34 am
Nice garage! (and cars!)
Sat Dec 15, 2012 4:15 pm
underscore wrote:Ok gotcha, so I could run a full 3MZ without too much hassle. Did the 3 only come on autos or something?
yes the 3MZ only came mated to autos. now i did see one of the MR2 guys made an adapter plate and mated a larger TB on the 3MZ intake manifold. its the black plastic manifold but its lighter, less likely for heat soak, and larger runners. then he ran it with 1MZ VVT electronics. Still had to fight auto codes but no DBW issues
Sun Dec 16, 2012 6:05 am
That's pretty cool, I'll likely be doing this in a year or so.
Mon May 29, 2017 1:18 am
Working on a 2gr swap myself.
Mon May 29, 2017 12:46 pm
Cuttyman9 wrote:Working on a 2gr swap myself.
We're going to need build thread!
© 2015 AllTrac.net
phpBB Mobile / SEO by Artodia.