BLOWNTACO":2qp1h4uw said:Yeah,the visors are still available new. Look for the numbers I posted and contact RHDJAPAN. They sent sent mine along with my other parts super quick!
about how much would we be looking at for brand new rain visors?
BLOWNTACO":2qp1h4uw said:Yeah,the visors are still available new. Look for the numbers I posted and contact RHDJAPAN. They sent sent mine along with my other parts super quick!
gt4tified":1fuln9ap said:Part numbers for gearbox axle and driveshaft seals for the 185 puhleeease?
Yes, they are the same.Denver_whiteST185":2dqbc9td said:Conan, could you please let me know if these are the same for a ST205 tranny. thankyou so much.
See, you have the same numbersDenver_whiteST185":2dqbc9td said:"Part number 90311-50010 was superceded by part number 90311-50027"
Conan":1j89rwmq said:Yes, they are the same.Denver_whiteST185":1j89rwmq said:Conan, could you please let me know if these are the same for a ST205 tranny. thankyou so much.
See, you have the same numbersDenver_whiteST185":1j89rwmq said:"Part number 90311-50010 was superceded by part number 90311-50027"
Denver_whiteST185":392xkbxn said:the toyota parts guy gave me:
90311-38032 for the rear output seal
90311-47003 for the passenger side cv shaft output seal
90311-50027 for the driver side cv shaft output seal
Conan, could you please let me know if these are the same for a ST205 tranny. thankyou so much.
Also, what is the 90311-50010 seal for? is it the input seal from the transmission to the transfer case?
Edit:
1st toyota parts had this message when i put in PN 90311-50010:
"Part number 90311-50010 was superceded by part number 90311-50027"
BLOWNTACO":35unoiu6 said:Assuming that this is for a ST185, the numbers for the hard lines are:
Clutch master to flex line: 31481-20480
Clutch slave to flex line: 31482-20410
toayoztan":35unoiu6 said:The hardline between the slave cylinder and flex line is 31482-20470
The hardline between the master cylinder and flex line is 31481-20600 or 31481-20590. I'm not sure of the difference, but it says the first number is for "AT180, ST18#..MTM" and the second one is for "ST18#..MTM W(*66)".
31482-20410 in your case (cars made before August of 91)Denver_whiteST185":3gwkttwo said:So, im guessing that 31481-20480 is the correct master cylinder to flex hose part, but which one is the correct slave cylinder to flex hose piece?
75770-20080 MOULDING ASSY, HOOD, FRONT (MY92/93)Denver_whiteST185":ahkipvsd said:What are the part numbers for the faux CF trim peices. all 4 peices. AND would they still be available.