Turbo outlet hose size st165

Eurus

New member
I hate posting this, but I am having trouble finding the answer even through Google.
I am looking to replace the hose that comes from the turbo outlet to the Air-water on the st165, and therefore need to know the size to order it. I wont be able to see my car for a few days, and would like to order the hose when I order a new bypass valve tonight. I just need the internal diameter of the stock item. Thank you!!

Sorry if this is in the wrong place.
 

Eurus

New member
Found someone who did a FMIC and used 3" piping, also found a site that said a ct26 outlet is 2"~
 

polm

New member
It's 2 inches, I replaced mine recently. It's also 2 inches on the ct20b. For the record, the inlet that goes to the air filter is 2.75 inches.
Cheers
 

Eurus

New member
polm":dwp1jvhw said:
It's 2 inches, I replaced mine recently. It's also 2 inches on the ct20b. For the record, the inlet that goes to the air filter is 2.75 inches.
Cheers
All right, that makes sense. I ended up going with a 2" t- hose. Thank you for the information.

For future refrence, and of course I found this afterwards: http://www.turbocelica.nl/howto-blowoffvalve.htm

Basically doing that, but with an upgraded bpv.
 
Top