> Does the harness behind the switch plug into and work
> with the JDM mirrors?
You Need the JDM switch which has the "Retract" button.
Unless you want to just hook up your Own cool momentary-
On switch. Both plug in the harness. On the US switch
there is Just one pin missing that sends a retract signal.
All from memory. I have the mirrors, but never hooked them up.
I have the switch that has the retract button, as well as the mirrors, and the relay with a pigtail, and what all of the colored wires mean, but the stock harness that plugs into the switch is the same shape and has the same no. of prongs as the jdm one does. What i really wanted to do was take it and replace that switch, then cut the wires, to put them into the relay, but im not sure of where the relay sits in the circuit or anything. Does it go like this? And the other thing is where does the wires for the relay go? it only has the one plug on it.
Mirror--Relay--Mirror
|
|
Switch