Kenwood RX-570CD Deck - Question with REWARD!

I have a Kenwood RX-570CD deck in my RC right now. It came with the car and I am currently in the process of putting a new system in with dvd/cd/nav. I really need a wiring diagram for this unit so I know which wire is which on the harness than I can cut and splice it to my new unit. Problem is that this deck is japanese and I cannot find any info in english. If anyone can find me this wiring diagram for the harness of this deck I will paypal you $10. Just a little reward and maybe some motivation. :D

DECK
GetAttachmentaspx_18.jpg

Harness
GetAttachment-1aspx_14.jpg
 

AvivB

New member
Most Kenwood CD systems use the same set of colors...

Yellow - memory backup - connected to the battery (not via the switch).
Red - power - connected to the battery via the switch (ACC).
Black - power ground.

Blue/White - control for antenna.
Orange/White - dimmer input.

Purple & Purple/Black - Read/Right speaker (+/-).
Green & Green/Black - Rear/Left.
Gray & Grey/Black - Front/Right.
White & White/Black - Front/Left.

And on the trac side:
Light-blue/Yellow comes from battery directly.
Grey comes from ACC.
Brown - ground.
Black/Red or Purple/Light-blue (not sure) controls the antenna.
Purple & Violet - Front left speaker (+ & -)
Light-green & Light-blue - Front right.
Black & Yellow - Rear left.
Red & White - Rear right.
Light-blue/white & Light-blue/red - left door speaker.
Green & Green/black - right door.
 

TEAMFaint

New member
Dont cut and splice into your factory harness.
Go to Visions and get the Metra harness with factory amplifier so all you have to do is
match the colors on the back of that deck to the harness (power, accessory, ground, remote, power antenna) then your two rca's for your speakers
then all you have to do is simply plug in the unit to the factory plugs.

Its 2010 and people still dont realize this?
 
TEAMFaint":1eepznrz said:
Dont cut and splice into your factory harness.
Go to Visions and get the Metra harness with factory amplifier so all you have to do is
match the colors on the back of that deck to the harness (power, accessory, ground, remote, power antenna) then your two rca's for your speakers
then all you have to do is simply plug in the unit to the factory plugs.

Its 2010 and people still dont realize this?

no i know this but im from small town alberta and no where carries this. wait time will be 2 weeks to get it in. I may wait but i'd like throw it in asap
 

TEAMFaint

New member
I have them in stock at my store here at Visions in Medicine Hat.
If you truly need one, I can ship one to you.
Shouldnt take very long to get from here to there via canada post.
$15 and it just makes things much-o simpler.
 
Top