Switch to full style
For everything related to the inside of the car!!
Post a reply

No high beams! Help!

Mon Aug 10, 2015 1:30 pm

High beams do not work. Fog lights flash to pass and low beams do all work just standard high beams the inside indicator does come on when I switch to high beams but the lights don't and the fog lights do not turn off.
Members don't see the above ad. Register now

Re: No high beams! Help!

Mon Aug 10, 2015 6:35 pm

Based on the wiring diagrams, I would say the most likely causes are the combination switch itself or bad contacts in the wire connector to the combination switch. Pull the switch and look for dirty or corroded connections. If you don't find anything wrong at the connector, try to locate a used switch from another Celica.

Re: No high beams! Help!

Mon Aug 10, 2015 6:44 pm

Found the problem. The contacts inside the switch weren't making a connection. Tweaked the contacts and shes good to go. Thanks for the feed back.
Post a reply