Page 7 of 7

Re: making skid plates

PostPosted: Mon Jun 13, 2011 5:38 pm
by Toxygene
That is AWESOME!!!

Now can you make it powdercoated colors.

Re: making skid plates

PostPosted: Mon Jun 13, 2011 6:31 pm
by BNZ
why ? does someone look under the car ?

Re: making skid plates

PostPosted: Mon Jun 13, 2011 6:32 pm
by baktasht
Amazing work and great looking pieces!

Re: making skid plates

PostPosted: Sun Aug 21, 2011 5:53 am
by celigts
This was for the 165's right? Or was someone able to make one for the 185's cuz I'm looking to get one for my 185

Re: making skid plates

PostPosted: Sun Aug 21, 2011 8:44 am
by BNZ
I made one for a 185 also,so i have the designs and can make more. The only difference is that is a bit longer and the front brackets are different.

Re: making skid plates

PostPosted: Sun Aug 21, 2011 3:31 pm
by celigts
Could you post pictures by chance?

Re: making skid plates

PostPosted: Sun Aug 21, 2011 6:30 pm
by BNZ
I did not make any pictures of that particular one but is virtually identical with the one already posted above. There are only 2 small differences witch i also mentioned above.

Re: making skid plates

PostPosted: Fri Sep 09, 2011 1:49 pm
by LegacyofDan
as of last weekend i finally got a chance to install mine.
I am very happy with the product. 100% bolt on(one spacer was lost in shipping but that was not a problem to large bolts did just fine). oil change hole, trans fluid change hole. perfect.
I will post details about everything in due time. but needless to say i am very happy.

one cell phone pic that i posted on FBook:
Image

Re: making skid plates

PostPosted: Fri Sep 09, 2011 3:49 pm
by BNZ
I'm glad it was all straight forward and thanks for the good feedback.
Also worth mentioning,the hole in the middle there is a hole for an extender pipe thing you need to fabricate in order to put on the jack and easy-lift the car. I will make pictures of mine when i make it.
Under the hole is the place you normally jack the car up

Re: making skid plates

PostPosted: Thu Feb 05, 2015 10:19 pm
by underscore
Bumping this back up, any chance you'd be interested in selling a template for one of these? I've got a bunch of sheet stainless lying around but I'd prefer to take the guesswork out of the process.