need help

Cali/Nevada/AZ and surrounding States

need help

Postby xkirex » Fri Mar 06, 2009 6:20 am

anybody in the 909/pomona area know or have the means to help change a clutch on my car. I dont wanna get it done at a shop cuz of the cost. Just need someone to help me out. =[ just wondering
Members don't see the above ad. Register now - it's free!
Image
User avatar
xkirex
Club Member
 
Posts: 436
Joined: Fri Jul 01, 2005 9:55 pm
Location: Pomona, California 909

Postby solarinsocal » Mon Mar 09, 2009 4:34 pm

Wow, that's a tall order! :doh: Hahaha. Are you looking for someone to assist you as in you know what you are doing and need an extra set of hands or are you looking for someone to do it for you and you be the extra set of hands?
Image
User avatar
solarinsocal
Club Member
 
Posts: 224
Joined: Tue Apr 17, 2007 1:28 pm
Location: Ontario, California

Postby xkirex » Tue Mar 10, 2009 4:57 am

well I've never done it. so I'd be the extra helping hands. A local buddy said his shop would do the clutch swap for 200 bucks but they are used to working on hondas and i dunno about their work. I just want this thing to start running again.
Image
User avatar
xkirex
Club Member
 
Posts: 436
Joined: Fri Jul 01, 2005 9:55 pm
Location: Pomona, California 909

Postby celicaGTS_T » Tue Mar 10, 2009 5:00 am

Ive got some buddies who work at proto motoring if ur interested... off La Cadena. They work on toyota's, honda's, nissan's, etc.... Lemme know
User avatar
celicaGTS_T
Club Member
 
Posts: 454
Joined: Fri Jun 23, 2006 10:57 pm
Location: Riverside, CA

Postby solarinsocal » Tue Mar 10, 2009 4:49 pm

$200 is quite the hook up price if they truly can change the clutch out on the alltrac. Proto may be a good place to take it if not.
Image
User avatar
solarinsocal
Club Member
 
Posts: 224
Joined: Tue Apr 17, 2007 1:28 pm
Location: Ontario, California

Postby cmonteiro1 » Tue Mar 10, 2009 6:27 pm

Make sure you get the $200 total cost in writing.
1991 ST185
Mods:
Aussie DP, 3in Exhaust, Wideband A/F, BayArea FMIC, HKS SSQ Blow Off Valve, Forge Waste Gate Actuator, AEM ECU, SARD 800 , Walbro Pump, ATS Fuel Rail Mod, ATS Fuel Pres. Reg. Mod., 60 trim upgraded ct26.
cmonteiro1
Club Member
 
Posts: 404
Joined: Thu Jan 05, 2006 1:54 am
Location: Phoenix, AZ

Postby Rpz123isme » Tue Mar 10, 2009 7:14 pm

I am sure once they start the price will go up. I told you i could help if it will make it to my casa. All of my tools reside here.
Hard works pays off in the long run, but procrastination pays off now!
Hesperia, CA
1988 St165 - Project Bacardi with a 4sgte
User avatar
Rpz123isme
Established Member
 
Posts: 1053
Joined: Sat Feb 02, 2008 5:04 am
Location: Insane, CA

Postby xkirex » Wed Mar 11, 2009 7:16 am

yea man. I was actually hopin that you'd still be willing to help me out. It will not make it under its own power but i can prob get it towed there or something. I just need to know what days you would be available. if anything i'd be down to drive down the weekends and knock it out
Image
User avatar
xkirex
Club Member
 
Posts: 436
Joined: Fri Jul 01, 2005 9:55 pm
Location: Pomona, California 909

Postby Rpz123isme » Wed Mar 11, 2009 4:12 pm

i sent you a pm. btw the clutch i have might not work it is from a 185? does anyone know if a 185 clutch will work on a 165?
Hard works pays off in the long run, but procrastination pays off now!
Hesperia, CA
1988 St165 - Project Bacardi with a 4sgte
User avatar
Rpz123isme
Established Member
 
Posts: 1053
Joined: Sat Feb 02, 2008 5:04 am
Location: Insane, CA

Postby wizzards581 » Thu Mar 12, 2009 1:25 am

$200 for a fwd/rwd clutch change is decent asking price... i think $200 for the alltrac is an estimated price.. :D
-90 celica turbo All-Trac (sold)
-03 matrix XR
wizzards581
Established Member
 
Posts: 1362
Joined: Fri Jan 06, 2006 1:20 am
Location: Nor Cal

Postby rrain3288 » Fri Mar 13, 2009 1:11 am

once they get into the car your price is going to jump up to around 500+1000 there thinking its the same as the reg celica's the alltrac trans is alot more time intensive and a true pain in the a#*
Why me!!!!
92 Celica Alltrac-gen 3 swap
User avatar
rrain3288
Club Member
 
Posts: 253
Images: 0
Joined: Mon Feb 23, 2009 4:51 am
Location: Tucson AZ

Postby xkirex » Sun Aug 02, 2009 11:09 pm

Thread Revive!

Ok, my car has been sittin and chillin for months already and its starting to make me sad.

Anyone got the tools and stuff to help change out my clutch.

Robert, i know you'd say you'd help and im kinda just waiting on you to hit me up whenever but if i can get it fixed sooner then that would be cool.

shoot me a PM guys if you guys are around the 909/pomona area and can help me change this shit out. =[
Image
User avatar
xkirex
Club Member
 
Posts: 436
Joined: Fri Jul 01, 2005 9:55 pm
Location: Pomona, California 909

Postby celicast184 » Mon Aug 03, 2009 4:25 pm

ill love to help, but never really done a clutch job on an alltrac. just don't know how much trouble its going to be..
Image
I <3 MY ST214
User avatar
celicast184
Club Member
 
Posts: 732
Images: 0
Joined: Fri May 16, 2008 5:05 pm

Postby xkirex » Wed Aug 05, 2009 6:58 pm

Thanks to all the guys the pm'ed me about helping me out. but somehow I got a hold of a local mechanic who was willing to do the clutch for 175 flat rate. he is currently working on it and got the clutch out and to my surprise. He got the clutch off with keeping the engine in the car. Amaaazed. the clutch disk that i had taken out was completely owned! I mean NOOOO meat on the pads at all. Ill snap some pictures of the progress and post em.

SOOO i might have the alltrac running by tonight =D. wish me luck!
Image
User avatar
xkirex
Club Member
 
Posts: 436
Joined: Fri Jul 01, 2005 9:55 pm
Location: Pomona, California 909

Postby alltracshoak » Wed Aug 05, 2009 10:47 pm

good luck!!!
current:
90 st185
GT4 AWD
Image
rip: 92 st185 @ 178k :(
User avatar
alltracshoak
Gold Member
 
Posts: 2638
Joined: Mon Oct 10, 2005 10:13 pm
Location: centralcal CA

Next

Return to SouthWest

Who is online

Users browsing this forum: No registered users and 1 guest