Thu Jul 04, 2013 9:03 pm
I am located north of pittsburgh. I need help getting my all trac running. It was running after putting a jdm engine in and
it made a noise and shut off, now it cranks, sounds like a normal crank to me, not fast like the timing belt broke or anything, but it wont fire. help!
Fri Jul 05, 2013 2:41 am
There's a number of things it could be. Was anything else going on at the time? Based on your description it could be fuel not reaching the motor, worn plugs, distributor. Or empty fuel tank. I'm just going off of the troubleshooting section of my book.
There's a few other things it could be as well.
Fri Jul 05, 2013 7:40 pm
Gotta see if yer missing fuel or spark first and then we can help ya man ! My 165 came from " Smithton " Just south of you ...
Fri Jul 05, 2013 8:49 pm
There's myself and one other guy located in Pittsburgh that I know of. I agree with the above, check for spark, then fuel, then air. If you have all 3 and your timing isn't completely backwards it should atleast kick
Sun Jul 21, 2013 6:17 pm
I'm in Pittsburgh and am frequently up in the butler area. Let me know if you need any help
© 2015 AllTrac.net
phpBB Mobile / SEO by Artodia.