Hi from birmingham uk
13 posts
• Page 1 of 1
Hi from birmingham uk
Hi all,
member of the uk sites thought I would venture over here!!
I own a 1988 ST165.
She has only 2 owners, 96k miles on the clock, she was standard when I got the car.
Engine wise, she has a full exhaust and downpipe system, a blitz filer, custom alloy rad, hybrid turbo, FCD and manual boost controller. est power 210bhp.
I am still on the std shox and springs, I have uprated the brakes, I run a 185 single pot caliper set up at the front, with aftermarket, pads, discs, hose and fluid.
Wheel wise I run 17"x7.5" rims with 205 40 17" tyres.
Body work features complete de badge, custom hand cut wing and bonnet vents, modifield front bumper with further custom mods to come.
She features a fair bit of Ice and styling products inside as well.
Last year she took part in a magazine group thrash for gt4s and ran 15.4sec qtr, with a slipping clutch.
I hope you like her and I look forward to getting to know you guys!
Some fantastic info on 165s on this site
Cheers
Richard
member of the uk sites thought I would venture over here!!

I own a 1988 ST165.

She has only 2 owners, 96k miles on the clock, she was standard when I got the car.
Engine wise, she has a full exhaust and downpipe system, a blitz filer, custom alloy rad, hybrid turbo, FCD and manual boost controller. est power 210bhp.
I am still on the std shox and springs, I have uprated the brakes, I run a 185 single pot caliper set up at the front, with aftermarket, pads, discs, hose and fluid.
Wheel wise I run 17"x7.5" rims with 205 40 17" tyres.
Body work features complete de badge, custom hand cut wing and bonnet vents, modifield front bumper with further custom mods to come.
She features a fair bit of Ice and styling products inside as well.
Last year she took part in a magazine group thrash for gt4s and ran 15.4sec qtr, with a slipping clutch.
I hope you like her and I look forward to getting to know you guys!
Some fantastic info on 165s on this site

Cheers
Richard
Members don't see the above ad. Register now - it's free! | |
ST165, 88 model, lots of street style with rally breeding
Based in the UK.
Based in the UK.
- alwayzsidewayz
- Club Member
- Posts: 39
- Joined: Wed Jun 21, 2006 4:23 pm
Some further pictures
Enjoy






Enjoy

ST165, 88 model, lots of street style with rally breeding
Based in the UK.
Based in the UK.
- alwayzsidewayz
- Club Member
- Posts: 39
- Joined: Wed Jun 21, 2006 4:23 pm
Hi Rich,
big hello to the owner of probably the cleanest 165 in the UK
enjoy your stay here buddy.
regards.
G.
big hello to the owner of probably the cleanest 165 in the UK

enjoy your stay here buddy.
regards.
G.
ST165 turbo 4WD
ST185 GT-FOUR RC Carlos Sainz Limited Edition 825•5000
ST185 turbo 4WD Carlos Sainz Limited Edition 2541•5000

ST185 GT-FOUR RC Carlos Sainz Limited Edition 825•5000
ST185 turbo 4WD Carlos Sainz Limited Edition 2541•5000

-
Gary ST165 - Established Member
- Posts: 1524
- Images: 0
- Joined: Sun Jan 01, 2006 10:11 pm
- Location: United Kingdom
whatcha matey!!!, its thanks to your links in your sigs I am here lol!!
Cheers for the comment re the car.
I have now got the body work cleaner than my 06 reg golf!lol
Looking forward to seeing further info re your project.
Many thanks for the HG btw.
Lots of great info and ideas on this site!!
Cheers for the comment re the car.

Looking forward to seeing further info re your project.
Many thanks for the HG btw.
Lots of great info and ideas on this site!!
ST165, 88 model, lots of street style with rally breeding
Based in the UK.
Based in the UK.
- alwayzsidewayz
- Club Member
- Posts: 39
- Joined: Wed Jun 21, 2006 4:23 pm
beautiful 165.
did you custom fabricate your hood and fenders?
i really like them.
cheers.
did you custom fabricate your hood and fenders?
i really like them.
cheers.
Nigel in Hawaii
From Hell and Back
From Hell and Back
-
theUNYTEDone - GTFour God
- Posts: 5085
- Joined: Sun Jan 22, 2006 10:56 pm
- Location: Kamo'ili'ili Town
Cheers for replys guys,
re the vents, they were custom cut outs, done by hand after loads of measuring, for the hood I wanted to release some off the latent heat over the turbo, so cut out in the sections just over the tub.
The wing was free hand, and links to a duct leading to the gap in the inner wing for my filter, tbh its more show than go, but I figure it matches the other vent!
I am enjoying reading all about the 165s on here!!!
re the vents, they were custom cut outs, done by hand after loads of measuring, for the hood I wanted to release some off the latent heat over the turbo, so cut out in the sections just over the tub.
The wing was free hand, and links to a duct leading to the gap in the inner wing for my filter, tbh its more show than go, but I figure it matches the other vent!

I am enjoying reading all about the 165s on here!!!
ST165, 88 model, lots of street style with rally breeding
Based in the UK.
Based in the UK.
- alwayzsidewayz
- Club Member
- Posts: 39
- Joined: Wed Jun 21, 2006 4:23 pm
Hey Rich- car is looking good as always
hope all is well...


hope all is well...

Steve Gillies
ST-165 88 UK ([color=red]BETSY[/color])
[url=http://i32.photobucket.com/albums/d30/steve-gillies/Betsy/RollingRoad005.jpg]377BHP 353Ib/Ft[/url]
UK
ST-165 88 UK ([color=red]BETSY[/color])
[url=http://i32.photobucket.com/albums/d30/steve-gillies/Betsy/RollingRoad005.jpg]377BHP 353Ib/Ft[/url]
UK
-
**BETSY** - Club Member
- Posts: 300
- Joined: Fri Oct 08, 2004 11:08 pm
- Location: Sussex UK
Hey steve, small internet !!! lol.
how is Betsy??

how is Betsy??
ST165, 88 model, lots of street style with rally breeding
Based in the UK.
Based in the UK.
- alwayzsidewayz
- Club Member
- Posts: 39
- Joined: Wed Jun 21, 2006 4:23 pm
13 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest