Page 1 of 1

Old Camry AllTrac with a Heart of Platinum

PostPosted: Sun May 21, 2006 3:37 pm
by TOYRACR92
Ok well a Friend of mine has finnally finished his
1990 Camry AllTrac Proj
it has all the Drivetrain of a 97 Celica Alltrac
The 264bhp 3SGTE Motor has been Strengthen with new Forged Pistons and rods, ported Head, ACT clutch, Fidanza Flywheel, 3"custom Downpipe all the way thru to the N1 Muffler. Custom Intercooler Plumbing, F
its even a bit more quicker with HKS F-Conn piggy back unit.
All the 97Celica AllTrac Rotors and Calipers are on it. Also the Celica Gauge Cluster has been Fabbed in.

This is a NIce Sleeper and alot of Fun

Image
Image
Image

http://www.MySpace.com/HuxRacing

PostPosted: Sun May 21, 2006 4:02 pm
by CMS-GT4
Thats a cool little car. I think some black wheels would be fitting, and maybe coating the IC black. That way no one would have any idea of what was coming. :evil:

PostPosted: Sun May 21, 2006 4:10 pm
by Gary ST165
:sleeper mode:

reminds me of: Image I pity the fool!

:sleeper mode:


Great project 8)

PostPosted: Wed May 24, 2006 12:45 am
by alltracman78
Not bad, but a hood scoop and a huge fmic hardly qualify as "sleeper".
:D

Rust ?

PostPosted: Fri May 26, 2006 11:53 pm
by GMan
I have not seen many, if any; Camries without rust.
Needs a few dents & dings and a bit of dirt, and it will be Invisble. :-)

Cool project !

Regards;

PostPosted: Thu Jul 13, 2006 1:48 am
by wizzards581
camry's i seen dont have rust. my family have a few and no rust.

PostPosted: Thu Jul 13, 2006 2:00 am
by Gary
wizzards581 wrote:camry's i seen dont have rust. my family have a few and no rust.

That's because they don't use salt on the road in CA. :wink:

PostPosted: Thu Feb 15, 2007 4:39 pm
by Brandon24pdx
Any tech info about swapping a 3S-GTE into one of these 88-91 All-trac Camrys available anywhere?

PostPosted: Thu Feb 15, 2007 11:37 pm
by 2RM
I have seen a Turbo 4WD Camry before but it was a diesel and it was in Europe. :P

PostPosted: Wed Apr 18, 2007 11:45 pm
by alltracman78
Brandon24pdx wrote:Any tech info about swapping a 3S-GTE into one of these 88-91 All-trac Camrys available anywhere?


Should be pretty cake.
They came stock with the 3SFE, so same family.
Mechanicals should bolt right up.
You probably want to use a Celica Alltrac trans, if the prop shaft and driveshafts will bolt up to it.

Wiring will be the hardest part most likely.

PostPosted: Thu Apr 19, 2007 12:55 am
by Mafix
actually if you stick to a gen 2 motor (1990) it should drop right in with a GTE harness and plug and go.

PostPosted: Thu Apr 19, 2007 1:29 am
by TheAutoholic
Mafix wrote:actually if you stick to a gen 2 motor (1990) it should drop right in with a GTE harness and plug and go.

Really?
Hmmm :D

PostPosted: Fri Apr 20, 2007 5:42 pm
by alltracman78
Mafix wrote:actually if you stick to a gen 2 motor (1990) it should drop right in with a GTE harness and plug and go.


What?

How do you figure.

You are saying the 3SGTE wiring harness will connect right up to the Camry chassis harnesses?
Unless you have personally done it, or seen it first hand, I really doubt it would.

Re: Old Camry AllTrac with a Heart of Platinum

PostPosted: Thu Sep 20, 2007 3:14 pm
by not12listen
TOYRACR92 wrote:Ok well a Friend of mine has finnally finished his
1990 Camry AllTrac Proj
it has all the Drivetrain of a 97 Celica Alltrac
The 264bhp 3SGTE Motor has been Strengthen with new Forged Pistons and rods, ported Head, ACT clutch, Fidanza Flywheel, 3"custom Downpipe all the way thru to the N1 Muffler. Custom Intercooler Plumbing, F
its even a bit more quicker with HKS F-Conn piggy back unit.
All the 97Celica AllTrac Rotors and Calipers are on it. Also the Celica Gauge Cluster has been Fabbed in.

This is a NIce Sleeper and alot of Fun

Image
Image
Image

http://www.MySpace.com/HuxRacing


can you do me a huge favor? ask your friend if he used the Camry drive shaft or the Celica drive shaft...

my wife wants to get her AllTrac Camry going. :)

PostPosted: Fri Sep 21, 2007 2:43 am
by GMan
> alltracman78
> Location: Franklin Ma
> Posted: Wed May 24, 2006 12:45 am Post subject:
> Not bad, but a hood scoop

He Was using a stock A/A for a time Before he put on the fmic.

> and a huge fmic

The FMIC Could be a fake ? :-)
Just an intake....

> hardly qualify as "sleeper".

All in the eye of the beholder. It is "Only' a Camry.

Bringing on an Old Thread back to life.

Regards;