Home of the 10 Sec/210 mph mile AllTrac

Talk about your project car here

Re: Home of the 10 Sec/210 mph mile AllTrac

Postby CSAlltrac » Fri Oct 04, 2013 2:10 am

+38
Members don't see the above ad. Register now - it's free!
ALLTRAC AT FIRST SIGHT
User avatar
CSAlltrac
Established Member
 
Posts: 2026
Joined: Fri May 05, 2006 1:47 pm
Location: ATX

Re: Home of the 10 Sec/210 mph mile AllTrac

Postby aus jd 2703 » Tue Dec 03, 2013 9:38 pm

pat what seats and rails are you running?
looking into seat options for my car
aus jd 2703
Established Member
 
Posts: 1089
Joined: Wed Apr 30, 2008 12:02 am

Re: Home of the 10 Sec/210 mph mile AllTrac

Postby alltrac101 » Wed Dec 04, 2013 12:33 am

I run 2 Sparco Pro2000 with the Sparco vertical brackets. Pass side is fixed to a custom SS rail while the drivers is on a slider fixed to another ss rail...drivers side has only 2" of slide because of the roll bar
Home of the 210 mph Standing Mile Celica AllTrac
alltrac101
Club Member
 
Posts: 428
Images: 0
Joined: Mon Aug 16, 2004 7:48 pm
Location: Palm Beach, Fl

Re: Home of the 10 Sec/210 mph mile AllTrac

Postby aus jd 2703 » Wed Dec 04, 2013 12:53 am

Did you have to off set the seat to one side or remove door trims for it to fit with out hitting the door/window? I have been told your seat shouldn't fit so i am curious if you had to do any modifications? Thanks
aus jd 2703
Established Member
 
Posts: 1089
Joined: Wed Apr 30, 2008 12:02 am

Re: Home of the 10 Sec/210 mph mile AllTrac

Postby alltrac101 » Wed Dec 04, 2013 12:45 pm

No trim mods, I mocked them up so I wouldn't have to cut the door cards, it's close tho, 1/2" on the DS, the PS is 1 1/2"....The difference is because of where the steering column is located...DS centered on the coulmn.
Home of the 210 mph Standing Mile Celica AllTrac
alltrac101
Club Member
 
Posts: 428
Images: 0
Joined: Mon Aug 16, 2004 7:48 pm
Location: Palm Beach, Fl

Re: Home of the 10 Sec/210 mph mile AllTrac

Postby ALLensTRAC » Thu Apr 10, 2014 8:50 pm

Hey Pat I know that you don't frequent here as often but I have a question I believe you are the only one who can answer. What clearance do you have for your front brakes with the 18x9.5+38 RPF1's? Could you run 355mm rotors and do you have some inner barrel pics or spoke to caliper pics I could look at? I am ready to order wheels but they are special order in SBC and I need some clearance questions answered for my 355mm rotors. Thank you in advance for any help or advice you can provide!!!
Allen

1992 Toyota Celica Alltrac "Never ending Project"
2014 Lexus CT200h Redline/Black "Daily project"
2006 Toyota Highlander Wifes daily
User avatar
ALLensTRAC
Club Member
 
Posts: 556
Joined: Thu Dec 23, 2010 11:33 pm
Location: Sarasota,FL

Re: Home of the 10 Sec/210 mph mile AllTrac

Postby alltrac101 » Fri Apr 11, 2014 3:47 pm

Hey Allen
I'm running 13" x 1" rotors & if I remember correctly the spoke to caliper was at least 3/8" - 1/2" at its closest point....if you run a 14" rotor the spoke moves away from the caliper so there will be even more clearance....I all depends on the hat offset & caliper dimensions of course
Good Luck
Pat
Home of the 210 mph Standing Mile Celica AllTrac
alltrac101
Club Member
 
Posts: 428
Images: 0
Joined: Mon Aug 16, 2004 7:48 pm
Location: Palm Beach, Fl

Re: Home of the 10 Sec/210 mph mile AllTrac

Postby ALLensTRAC » Fri Apr 11, 2014 10:46 pm

alltrac101 wrote:Hey Allen
I'm running 13" x 1" rotors & if I remember correctly the spoke to caliper was at least 3/8" - 1/2" at its closest point....if you run a 14" rotor the spoke moves away from the caliper so there will be even more clearance....I all depends on the hat offset & caliper dimensions of course
Good Luck
Pat


Thanks for the quick reply!!! Are your Wilwoods 4 or 6 piston? Do you have the model number by chance? Current hat offset is 43.8 and I can either go with floating 2 piece 14" or solid 13.1" rotors although they are 30mm thick to your 25mm. If I can get your caliper dimensions I can work out the math and compare. Again thank you for the help sir!!! Your car is THE benchmark when it comes to Alltracs bar none!!
Allen

1992 Toyota Celica Alltrac "Never ending Project"
2014 Lexus CT200h Redline/Black "Daily project"
2006 Toyota Highlander Wifes daily
User avatar
ALLensTRAC
Club Member
 
Posts: 556
Joined: Thu Dec 23, 2010 11:33 pm
Location: Sarasota,FL

Previous

Return to My Project

Who is online

Users browsing this forum: Google [Bot] and 1 guest