project alltracst185 update! 6/15/14 rust is gone!!! :)

Talk about your project car here

new seats!

Postby alltracst185 » Fri Oct 03, 2008 10:08 pm

so i decided to get the hks timing belt.i NEED to stop being lazy and install all my parts!
Members don't see the above ad. Register now - it's free!
Last edited by alltracst185 on Mon Dec 01, 2008 1:03 am, edited 1 time in total.
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

update!!

Postby alltracst185 » Wed Nov 26, 2008 6:25 am

So i started to install my huge pile of parts which include

hks 272 cams
hks cam gears
hks timming belt
engle valve springs
speed-source fuel rail
ss fuel lines
rc 550 injecters
aeromotive fpr
walboro 255 fuel pump
wide band kit
samco hoses
new cap and rotor
ngk plugs
aem ems with both sensors:D

Then i hit a bump in the road and found out that my valve cover was junk :x so now i have another part to find. I plan to clean the carbon build up from the head, intake mani( if i don't just get another one) and clean or replace the throttle body.

I'll keep this thread more updated i promise :D pics soon!
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

Postby alltracst185 » Fri Nov 28, 2008 6:20 am

So as promised , here is my stock pile of parts!

speed-source fuel rail and rc 550 injectors
Image

Image

aeromotive fpr and some anodized 6an fittings
Image

ss fuel lines inside
Image

walboro 255 fuel pump
Image

ngk one step colder spark plugs
Image

cusco catch can (already installed)
Image

msd plug wires (already installed along with msd blater coil)
Image

samco rad hoses
Image

arp head studs
Image

blitz rad cap (already installed)
Image

hks adjustable cam gears
Image

hks 272 cams and engle valve springs
Image
Image
Image

hks fine tune timing belt
Image
the beast to control the trac
Image

jdm side markers
Image

jdm power folding mirrors (before cleaning and wax)
Image
one cleaned and waxed
Image
the other one not cleaned or waxed (comparison shot)
Image
both cleaned and waxed ready for install
Image

rc bumper install pic ( i don't know why but i like the way it looks in this pic)
Image

rc bumper shot (awaiting paint)
Image

my engine bay before i decide to stop being lazy and install some parts
Image

random pics of my car in my garage
Image
Image

a pic of my greddy td06 20g
Image
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

Postby alltracst185 » Sun Nov 30, 2008 9:27 pm

I picked up some new seats today!

Image
Image

should look good in the trac huh :wink:
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

Postby RedCelicaTRD » Sun Nov 30, 2008 10:20 pm

Whats going on with those CCWs in the background?
Wayne
1990 All Trac
2017 SRT Challenger Hellcat
Grumpy Moderator
RedCelicaTRD
GTFour God
 
Posts: 3947
Joined: Sun Aug 08, 2004 6:58 pm
Location: Syracuse, UT

Postby alltracst185 » Sun Nov 30, 2008 10:45 pm

RedCelicaTRD wrote:Whats going on with those CCWs in the background?


They are 5/114 bolt pattern 18 int the rear and 17 in the front. I got them to put a a supra but never got the supra :( make me an offer if you want them.
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

Postby Corey » Sun Nov 30, 2008 11:00 pm

So jealous, cant wait to see the finished product 8)
Image
User avatar
Corey
GTFour God
 
Posts: 4121
Images: 50
Joined: Sun Feb 11, 2007 12:12 am

1989 Toyota Celica

Postby alltracst185 » Mon Dec 01, 2008 12:47 am

Corey Darling wrote:So jealous, cant wait to see the finished product 8)


haha me too! :D


i love my trac :wink:
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

Postby alltracst185 » Wed Dec 03, 2008 4:46 am

So i got some time to work on the trac last week and today, YAY!

Lastweek i found out that my valve cover was junk :x so i got a new old one thanks to Gary! I plan to polish it in the next week or so.
Image
Image

Today i got the stock fuel rail and injectors out and cleaned some carbon build up in the throttlebody. The head is very dirty and needs a good hot tanking! I think my plans have changed a bit so i will be pulling the engine and cleaning it up :D I have to order a new hg and other seals and what not that is needed for the rebuild. Here is a shot of my head and engine bay as of now.
Image
Image

Hopefully i get a few hours to work on her this weekend :P
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

Postby vip09 » Wed Dec 03, 2008 8:01 pm

That head looks pretty nasty! It would definitely be a good idea to get that head refreshed when it comes out.
Best GT-S STOCK times: 1/4: 14.788 @ 94.98mph 1/8: 9.640 @ 75.87mph
Best Alltrac times: 1/4: 12.2 @ 115mph 1/8th: 7.9 @ 91mph
Image
vip09
Established Member
 
Posts: 1058
Joined: Sat Dec 31, 2005 5:53 pm
Location: Mobile, AL

Postby alltracst185 » Thu Dec 04, 2008 2:16 am

vip09 wrote:That head looks pretty nasty! It would definitely be a good idea to get that head refreshed when it comes out.


Oh ya i def plan too! :wink:
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

Parts

Postby GMan » Thu Dec 04, 2008 1:48 pm

Good luck on the project.

> I have to order a new hg and other seals and
> what not that is needed for the rebuild.

I have various collection of parts and gaskets.
I do have an ATS HG too i never used.

let me know.

Always good to make Progress.

Regards;
-----------------------
GMan
Gold Member
 
Posts: 1163
Joined: Mon Aug 16, 2004 8:12 pm
Location: Boston, MA USA

Postby WarTowels » Wed Feb 04, 2009 3:20 am

Image

Image

It's near impossible to make noticeable changes on a photo like this because the quality of the image itself is low.

-Towels
2003 S2000
1985 300TD
User avatar
WarTowels
Gold GTfour God
 
Posts: 6443
Joined: Tue Aug 17, 2004 4:30 am
Location: I live in a garage.

Postby alltracst185 » Wed Feb 04, 2009 4:08 am

haha cell phone pics suck! :shoots:
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

Postby alltracst185 » Fri Feb 06, 2009 1:16 am

so i just got out of work and now i get to go strip the greddy td06 20g kit off.

the first step to the step up in the high hp world :evil:

awaiting the new hks gt3040 :smokes:
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

PreviousNext

Return to My Project

Who is online

Users browsing this forum: No registered users and 2 guests