project alltracst185 update! 6/15/14 rust is gone!!! :)

Talk about your project car here

Re: project alltracst185 8/17 alive again :D

Postby alltracst185 » Wed Aug 17, 2011 8:46 pm

Played around a bit with my AEM EMS to try to get her to run a little better. Safe to say I could use some schooling on EMS tuning :P My new plan is to get it ready for Import Face Off at New England Dragway September 25th :smokes: We'll see how things go :shrug:
Members don't see the above ad. Register now - it's free!
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

Re: project alltracst185 8/17 alive again :D

Postby alltracst185 » Wed Aug 24, 2011 12:04 am

Worked on my car for a bit today and took a short video of the first start up on the AEM EMS :D I let her run for a few seconds but, I get scared and shut it off :P I also need to add some coolent before I let it run for a extened period of time. I have a small oil leak at the oil filter sandwhich and a fuel leak coming from my FPR return line. All very easy fixes. Just have to route and weld up some intercooler pipes and finish my down pipe. :) Here is the first startup vid :wink:

Image
Last edited by alltracst185 on Sun Aug 28, 2011 3:18 pm, edited 1 time in total.
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

Re: project alltracst185 8/23 new first start vid :)

Postby DudeMan » Wed Aug 24, 2011 1:20 am

Right on man, your getting closer! :D
-Chase

1990 4Runner SR5
1990 Celica GT-Four
User avatar
DudeMan
Club Member
 
Posts: 716
Joined: Mon Feb 02, 2009 5:41 pm
Location: Edmonton, AB Canada

Re: project alltracst185 8/23 new first start vid :)

Postby alltracst185 » Wed Aug 24, 2011 2:12 am

DudeMan wrote:Right on man, your getting closer! :D

Thanks bro :oops: Can't wait to get her tuned So I can actually drive it.
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

Re: project alltracst185 8/23 new first start vid :)

Postby Hotrodhendrix » Wed Aug 24, 2011 5:09 pm

Congrats on the first start!!!
"The more you let life's obstacles slow you down the longer it will take to defeat them."
~Yours truly
User avatar
Hotrodhendrix
GTFour God
 
Posts: 3480
Joined: Thu Sep 16, 2004 5:45 pm
Location: DFW Texas

Re: project alltracst185 8/23 new first start vid :)

Postby Terracar » Wed Aug 24, 2011 5:49 pm

Congrats... I think the first start up is always the worst since if something is going to break, it happens then. Almost there, just a little more to go and you have yourself a beast.

-Terracar
'92 'trac - Demon - currently in need of some reconstructive surgery.
User avatar
Terracar
Established Member
 
Posts: 1553
Joined: Wed Oct 03, 2007 2:47 pm
Location: Battle Ground, WA

Re: project alltracst185 8/23 new first start vid :)

Postby Landon » Wed Aug 24, 2011 10:44 pm

i love how it kinda sounds like a tractor. lol. but seriously, this is exciting! get it tuned and dyno'd soon! to bad you aren't near washington cause we got an awd dyno at my school. : )
White 1995 BMW M3
Black '90 st185 Sold :(
User avatar
Landon
Established Member
 
Posts: 1092
Joined: Tue Nov 11, 2008 12:05 am
Location: Joseph, Oregon

Re: project alltracst185 8/23 new first start vid :)

Postby alltracst185 » Wed Aug 24, 2011 11:40 pm

Thanks everybody :oops: I have a palce in mind that i'll be bringing it to get tuned. They tuned my buddys 600 whp WRX. Klue is providing me with a good enough tune to drive on for the 500 miles break in period :) So far it sounds healthy :D I mocked up some intercooler piping to bring to work to weld together tomorrow. Pics will be up :wink:
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

Re: project alltracst185 8/23 new first start vid :)

Postby Hotrodhendrix » Thu Aug 25, 2011 1:29 pm

Your car isnt my cars twin in anyway anymore. :cry:
"The more you let life's obstacles slow you down the longer it will take to defeat them."
~Yours truly
User avatar
Hotrodhendrix
GTFour God
 
Posts: 3480
Joined: Thu Sep 16, 2004 5:45 pm
Location: DFW Texas

Re: project alltracst185 8/23 new first start vid :)

Postby alltracst185 » Fri Aug 26, 2011 1:23 am

Hotrodhendrix wrote:Your car isnt my cars twin in anyway anymore. :cry:

Hey don't look at me, you painted yours first :lol: Paint it Red again and I promise i'll keep my hood closed from now on :twisted:
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

Re: project alltracst185 8/23 new first start vid :)

Postby C-dubb » Sun Sep 04, 2011 3:44 pm

It sounds so angry!! Good work man. Those 272 cams give it a mean lope. Can't wait to see what it will do.
Cory Wilson 1990 st185
Image
User avatar
C-dubb
Club Member
 
Posts: 951
Joined: Mon Aug 09, 2004 4:24 am
Location: Holland, MI

Re: project alltracst185 8/23 new first start vid :)

Postby alltracst185 » Sun Sep 04, 2011 3:58 pm

Thanks! :oops: The reason it sounds like that right now is because there is no down pipe :P I have to find time to get it down to the custom exhaust shop to fab up a down pipe, been too busy with work and such that i'm suprissed I had time to mock up my top intercooler pipe and weld it together! Once the Down pipe is done I can work on the lower intercooler pipe and call this engine bay finished......for now :P I also got a AEM Uego for the plug and play opions with my EMS so I have my brand new Innovative LC-1 kit up for grabs, if anyone is interested in it PM me for a special "keeping up with my project" price :wink:
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

Re: project alltracst185 8/23 new first start vid :)

Postby alltracst185 » Sat Sep 24, 2011 12:22 am

Got my down pipe fabbed up today, I now have a working clutch and brakes :D Just need to make a lower intercooler pipe, run the vaccum lines, fill the tranny and install my AEM uego and i'll be ready for a tune :smokes:
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

Re: project alltracst185 8/23 new first start vid :)

Postby WarTowels » Sun Sep 25, 2011 1:41 am

Awesome news Adam

I'd love to come see it once you get her all squared away.

-Towels
2003 S2000
1985 300TD
User avatar
WarTowels
Gold GTfour God
 
Posts: 6443
Joined: Tue Aug 17, 2004 4:30 am
Location: I live in a garage.

Re: project alltracst185 8/23 new first start vid :)

Postby alltracst185 » Tue Sep 27, 2011 1:52 am

WarTowels wrote:Awesome news Adam

I'd love to come see it once you get her all squared away.

-Towels

Thanks Greg, it should be done by the next few weeks but can only be babied for at least 500 miles to be broken in then I have to take care of some body work and paint and a million dollars to get it tuned :lol: Here is a new video of her running.

Image
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

PreviousNext

Return to My Project

Who is online

Users browsing this forum: No registered users and 5 guests