project alltracst185 update! 6/15/14 rust is gone!!! :)

Talk about your project car here

Re: project alltracst185 11/20 new wheels, CCW's :)

Postby alltracst185 » Mon Nov 21, 2011 9:13 pm

Tazka wrote:Those look sick, 8) what wheels pat is going to roll now?

Thanks, I think he is just going to use his Gold Gram Lights, he sold these because they were just taking up space in his garage. :twisted:
Members don't see the above ad. Register now - it's free!
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

Re: project alltracst185 11/20 new wheels, CCW's :)

Postby Hotrodhendrix » Mon Nov 21, 2011 9:21 pm

alltracst185 wrote:
Hotrodhendrix wrote::notworthy: That is all my former twin

:lol: :rofl: Now I just need to find someone in my area that can bead roll my intercooler pipes! :bangshead:


Anyone decent with aluminum welding can do it. I ran partial beads on my VR4. Made sure that nothing warped and had no issue running the high horsepower it had at the time.
"The more you let life's obstacles slow you down the longer it will take to defeat them."
~Yours truly
User avatar
Hotrodhendrix
GTFour God
 
Posts: 3480
Joined: Thu Sep 16, 2004 5:45 pm
Location: DFW Texas

Re: project alltracst185 11/20 new wheels, CCW's :)

Postby alltracst185 » Mon Nov 21, 2011 9:35 pm

Hotrodhendrix wrote:
alltracst185 wrote:
Hotrodhendrix wrote::notworthy: That is all my former twin

:lol: :rofl: Now I just need to find someone in my area that can bead roll my intercooler pipes! :bangshead:


Anyone decent with aluminum welding can do it. I ran partial beads on my VR4. Made sure that nothing warped and had no issue running the high horsepower it had at the time.

I thought about this but, really wanted it done right. I might just end up doing that.
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

Re: project alltracst185 11/20 new wheels, CCW's :)

Postby alltrac101 » Wed Nov 23, 2011 2:09 am

alltracst185 wrote:
Tazka wrote:Those look sick, 8) what wheels pat is going to roll now?

Thanks, I think he is just going to use his Gold Gram Lights, he sold these because they were just taking up space in his garage. :twisted:

Adam
Great to see the CCW's in a loved home, LOL
The Grams are taking up space also, got a deposit on them, but the buyer is MIA, may put up for sale again soon.
I have some new dress shoes in the works

If you want I can ask one on my guys with a bead roller how much he'd charge to do some pipes, just let me know how many ends, materials & size

Pat
Home of the 210 mph Standing Mile Celica AllTrac
alltrac101
Club Member
 
Posts: 428
Images: 0
Joined: Mon Aug 16, 2004 7:48 pm
Location: Palm Beach, Fl

Re: project alltracst185 11/20 new wheels, CCW's :)

Postby alltracst185 » Wed Nov 23, 2011 4:01 am

alltrac101 wrote:
alltracst185 wrote:
Tazka wrote:Those look sick, 8) what wheels pat is going to roll now?

Thanks, I think he is just going to use his Gold Gram Lights, he sold these because they were just taking up space in his garage. :twisted:

Adam
Great to see the CCW's in a loved home, LOL
The Grams are taking up space also, got a deposit on them, but the buyer is MIA, may put up for sale again soon.
I have some new dress shoes in the works

If you want I can ask one on my guys with a bead roller how much he'd charge to do some pipes, just let me know how many ends, materials & size

Pat

Damn, i didn't know you were selling the Grams too, i prob would have bought those...lol. The shipping would kill me to send them down to FL to get them bead rolled. I only need 4 ends done, Thanks anyways Pat :)
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

Re: project alltracst185 11/20 new wheels, CCW's :)

Postby alltracst185 » Sat Jan 07, 2012 12:51 pm

I've been really busy with work and other things lately but, i'm happy to say I finaly found a place to get my intercooler pipes bead rolled and get this puppy back in full swing! :D
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

Re: project alltracst185 11/20 new wheels, CCW's :)

Postby alltracst185 » Tue Mar 27, 2012 1:04 am

Pulled the crossmember off to clean and paint. It was a PITA to get the 22 years of grease and grime off that thing!
Image

Also installed my ASI aluminum radiator
Image

Got the car running and pulled her out of the garage for the first time in 3 years! Here is the video of the it pulling out (open downpipe :evil: ).
Image
Image
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

Re: project alltracst185 3/26 pulled her out of the garage!

Postby Hotrodhendrix » Wed Mar 28, 2012 1:06 pm

Is it just me or does your hood seem to have the vent positioned farther forward than a stock CS/RC?? Motor looks really nice.
"The more you let life's obstacles slow you down the longer it will take to defeat them."
~Yours truly
User avatar
Hotrodhendrix
GTFour God
 
Posts: 3480
Joined: Thu Sep 16, 2004 5:45 pm
Location: DFW Texas

Re: project alltracst185 3/26 pulled her out of the garage!

Postby alltracst185 » Thu Mar 29, 2012 12:45 am

Hotrodhendrix wrote:Is it just me or does your hood seem to have the vent positioned farther forward than a stock CS/RC?? Motor looks really nice.

Thanks, The hood is the real deal CS/RC :wink:
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

Re: project alltracst185 3/26 pulled her out of the garage!

Postby Landon » Thu Mar 29, 2012 6:36 am

I imagine that sounds beast. What exhaust manifold do you have?
White 1995 BMW M3
Black '90 st185 Sold :(
User avatar
Landon
Established Member
 
Posts: 1092
Joined: Tue Nov 11, 2008 12:05 am
Location: Joseph, Oregon

Re: project alltracst185 3/26 pulled her out of the garage!

Postby Hotrodhendrix » Thu Mar 29, 2012 12:49 pm

alltracst185 wrote:
Hotrodhendrix wrote:Is it just me or does your hood seem to have the vent positioned farther forward than a stock CS/RC?? Motor looks really nice.

Thanks, The hood is the real deal CS/RC :wink:


Haha thought it was some kind of reproduction. Must have been the view in the picture. Shes looking gooooooooooooood.
"The more you let life's obstacles slow you down the longer it will take to defeat them."
~Yours truly
User avatar
Hotrodhendrix
GTFour God
 
Posts: 3480
Joined: Thu Sep 16, 2004 5:45 pm
Location: DFW Texas

Re: project alltracst185 3/26 pulled her out of the garage!

Postby alltracst185 » Thu Mar 29, 2012 10:34 pm

Landon wrote:I imagine that sounds beast. What exhaust manifold do you have?

It's a custom made ramhorn exhaust manifold, The video is open downpipe :evil: It sounds beast!!! 8)
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

Re: project alltracst185 3/26 pulled her out of the garage!

Postby C-dubb » Fri Apr 20, 2012 3:44 pm

That thing is looking and sounding awesome man. About the wheels...I want to say nice buy...but I hate the fact that you have them and I don't so...I'll leave it at that. haha. Damn I love those wheels. Where are you taking it to have the AEM tuned? I have to take mine back down to Illinois to have it re tuned since I've installed the new cylinder head...just haven't gotten around to it yet. Looking good, keep it up, can't wait to see how she runs after a good tune.
Cory Wilson 1990 st185
Image
User avatar
C-dubb
Club Member
 
Posts: 951
Joined: Mon Aug 09, 2004 4:24 am
Location: Holland, MI

Re: project alltracst185 3/26 pulled her out of the garage!

Postby alltracst185 » Sun Apr 22, 2012 2:00 pm

C-dubb wrote:That thing is looking and sounding awesome man. About the wheels...I want to say nice buy...but I hate the fact that you have them and I don't so...I'll leave it at that. haha. Damn I love those wheels. Where are you taking it to have the AEM tuned? I have to take mine back down to Illinois to have it re tuned since I've installed the new cylinder head...just haven't gotten around to it yet. Looking good, keep it up, can't wait to see how she runs after a good tune.

Thanks bro, I'm still really not sure where I want to get it tuned but leaning toward DSG :shrug: :lol: about the wheels, I do love them :wink:
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

Re: project alltracst185 6/4 bought a house! :D

Postby alltracst185 » Mon Jun 04, 2012 10:36 pm

So I've been away for a while but, I'm back and I have purchased a house with a two car garage so Celi has a new home :) That means my car WILL be done soon!!! :wink: I will be moving into my new home at the end of the month so pics will be up then.
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

PreviousNext

Return to My Project

Who is online

Users browsing this forum: No registered users and 3 guests