Plumbing now done
the Feed from radiator cap. the cap has had centre taken out so no pressure is held and the header tank cap now holds the pressure.
The header tank main return into bottom radiator hose.
Over all
Minimum parts list.
1 ) Header tank similar to above.
2 ) 8mm hose from rad to tank
3 ) optional 2 x 90 deg 32mm silicone hoses. ( you can just cut original bottom hose )
4 ) 32mm T piece 32,32,22mm 22mm is from header 32mm is to fit in bottom hose.
5 ) 22mm flexible hose for headr tank too bottom hose.
6 ) pipe and joiner to extend power stearing hose so you can relocate it.
7 ) misc aluminium / brackets to mount header tank / power steering.
8 ) hose clamps..
the Feed from radiator cap. the cap has had centre taken out so no pressure is held and the header tank cap now holds the pressure.
The header tank main return into bottom radiator hose.
Over all
Minimum parts list.
1 ) Header tank similar to above.
2 ) 8mm hose from rad to tank
3 ) optional 2 x 90 deg 32mm silicone hoses. ( you can just cut original bottom hose )
4 ) 32mm T piece 32,32,22mm 22mm is from header 32mm is to fit in bottom hose.
5 ) 22mm flexible hose for headr tank too bottom hose.
6 ) pipe and joiner to extend power stearing hose so you can relocate it.
7 ) misc aluminium / brackets to mount header tank / power steering.
8 ) hose clamps..