Page 14 of 16

Re: st185 hoping for 400bhp now mapped at 397bhp 370ft/lbs

PostPosted: Tue Nov 12, 2013 3:00 am
by CSAlltrac
Are you using launch control on the stock turbo?

Re: st185 hoping for 400bhp now mapped at 397bhp 370ft/lbs

PostPosted: Tue Nov 12, 2013 4:09 am
by MWP
Its interesting what youve done with the cage / rear subframe mount locations.
I know its difficult to feel, but do you think its made a difference?

Re: st185 hoping for 400bhp now mapped at 397bhp 370ft/lbs

PostPosted: Tue Nov 12, 2013 7:51 am
by mixer72
i'm using the LC on a hybrid ct26 made by Turbo Technics is a s148,

Re: st185 now 401bhp

PostPosted: Mon Nov 03, 2014 10:19 am
by mixer72
been some time since I did an update
Been doing a bit of work to the Beast and think I have found out why im was still getting a bit of knocking from the rear and felt a bit lose on the rear end even with the poly diff munt fitted, took the diff subframe hanger out and as you can see the bushes have well and truly gone ;( so will be changing them for some nice BRD race bushes :) and as I was there I have all ready fitted the BRD ally diff mount ready :) But this just shows how important it is to replace 20+ year old bushes.


Image
Image
Image
Image


BRD ally diff mount all in ready
Image
Image

all powder coated ready to fit back in :)
Image

Re: st185 hoping for 400bhp now mapped at 397bhp 370ft/lbs

PostPosted: Mon Nov 03, 2014 10:19 am
by mixer72
pics from a photo shoot with JANPANESE PERFROMANCE
Image
Image

Re: st185 hoping for 400bhp now mapped at 397bhp 370ft/lbs

PostPosted: Mon Nov 03, 2014 10:20 am
by mixer72
back from a Dyno day at Surrey dyno and very happy after being road mapped this is the first dyno its had,

Image

Boost
Image


Fuelling
Image

Re: st185 hoping for 400bhp now mapped at 397bhp 370ft/lbs

PostPosted: Sun Jul 26, 2015 3:03 pm
by mixer72
not done any updates as taken the engine out to freshen up for competing next year and looking to do a few more mods to get a bit more power and fitting lots of new parts that I now make and sell, please feel free to pop on to my BRD page and have a look round

https://www.facebook.com/Brooks.Racing.Dev

Re: st185 hoping for 400bhp now mapped at 397bhp 370ft/lbs

PostPosted: Tue Jul 28, 2015 5:50 am
by mixer72
few more parts I have been making
Image

Image

Image


Image

Image

Re: st185 hoping for 400bhp now mapped at 397bhp 370ft/lbs

PostPosted: Tue Jul 28, 2015 3:52 pm
by Sifu
Looking good!

Re: st185 hoping for 400bhp now mapped at 397bhp 370ft/lbs

PostPosted: Sun Sep 06, 2015 5:06 pm
by mixer72
new clutch thanks to GT4-play https://www.facebook.com/pages/GT4-Play ... 77?fref=ts

Image
Image

just the gear box now and I can put it back together

new clutch thanks to GT4-play https://www.facebook.com/pages/GT4-Play ... 77?fref=ts

Image
Image

new clutch fitted and made the cam cover side engine mount


Image

Image

Image


Image

Image
engine is back in :) so now I can carry on with the pipe work fabrication

Image

Re: st185 hoping for 400bhp now mapped at 397bhp 370ft/lbs

PostPosted: Sun Sep 06, 2015 5:08 pm
by mixer72
been doing some fabrication work on Decat pipes with Flexi section in ,


so started with a Jig to make the decat up on


Image


bottom parts of the Decat done

Image


top half done

Image


all ready for flexi

Image


flexi fitted in all nice

Image


the fun bit

Image



all done

Image


all cleaned and polished

Image


the inside of the pipe

Image


Image


test fit of the flexi decat

Image
Image
Image

all good so far but it may need a tweak hear and there, till im happy

Re: st185 hoping for 400bhp now mapped at 397bhp 370ft/lbs

PostPosted: Sat Sep 12, 2015 11:32 pm
by CSAlltrac
I need side motor mounts. Where can I get them from you? Cost?

Re: st185 hoping for 400bhp now mapped at 397bhp 370ft/lbs

PostPosted: Sun Sep 13, 2015 7:47 am
by mixer72
have a look on my BRD facebook page all the parts I make are in there and send a PM https://www.facebook.com/Brooks.Racing.Dev

Re: st185 hoping for 400bhp now mapped at 397bhp 370ft/lbs

PostPosted: Sun Sep 13, 2015 10:18 pm
by CSAlltrac
mixer72 wrote:have a look on my BRD facebook page all the parts I make are in there and send a PM https://www.facebook.com/Brooks.Racing.Dev

I don't have a Facebook but you have PM.

Re: st185 hoping for 400bhp now mapped at 397bhp 370ft/lbs

PostPosted: Wed Sep 16, 2015 3:42 am
by soarer.jzz30
Breathing intensifies.