Pipedreams ST205, 5S-GTE BEAMS

Talk about your project car here

Re: Pipedreams ST205, 5S-GTE BEAMS

Postby BADNEWS » Thu Feb 18, 2016 5:28 pm

How is the car coming along? Is the motor back together yet?
Members don't see the above ad. Register now - it's free!
90 ST185 W/ HTZ4094R (6768), 2.2, Fully Built
865AWHP, 591 torque
Hope to have some 1/4 times this summer of 2016!!!
User avatar
BADNEWS
Club Member
 
Posts: 671
Joined: Sun Oct 17, 2004 5:37 pm
Location: Milwaukee, WI

Re: Pipedreams ST205, 5S-GTE BEAMS

Postby Pipedreams » Thu Feb 18, 2016 6:17 pm

Haven't touched it since June. Been working abroad alot. And now I'm waiting to move to a new garage and it's taking alot longer than expected for the old tenant to move out. We started discussions in December and I don't want to tear it apart to much before the move.
Pipedreams
Club Member
 
Posts: 118
Joined: Fri Feb 28, 2014 3:14 pm
Location: Ludvika/Sweden

Re: Pipedreams ST205, 5S-GTE BEAMS

Postby Pingman » Sat Apr 30, 2016 8:06 pm

Been following your build from a far for a while now Pipedreams, amazed at what you achieved, totally inspiring can't wait to see further progress :)
Pingman
Newbie
 
Posts: 3
Joined: Fri Apr 29, 2016 5:37 pm

Re: Pipedreams ST205, 5S-GTE BEAMS

Postby gunt » Wed May 04, 2016 8:19 pm

are you starting with new block
gunt
Club Member
 
Posts: 24
Joined: Mon Jan 26, 2015 7:05 pm
Location: Ireland

Re: Pipedreams ST205, 5S-GTE BEAMS

Postby Pipedreams » Sun May 08, 2016 1:56 pm

Thanks Pingman :-)

I have only stripped down the new block. The garagemove is getting closer so I might get on with it soon.
Pipedreams
Club Member
 
Posts: 118
Joined: Fri Feb 28, 2014 3:14 pm
Location: Ludvika/Sweden

Re: Pipedreams ST205, 5S-GTE BEAMS

Postby abraxxa » Mon Jun 27, 2016 5:59 am

I'm still waiting on what is required to make the Beams fit an ST205 and E154F gearbox and make the VVTI work, thanks!
facelift ST205
User avatar
abraxxa
Club Member
 
Posts: 539
Joined: Tue Oct 04, 2005 5:08 pm
Location: Vienna, Austria

Re: Pipedreams ST205, 5S-GTE BEAMS

Postby Pipedreams » Mon Jun 27, 2016 6:25 am

The engine bolts right in. And getting the engine and vvt to work is all down to wiring and engine management. Since you mentioned you have a haltech ecu I'm not sure what you are asking? It reads camposition from the camsensor and controls it with a solenoid.
Last edited by Pipedreams on Mon Jun 27, 2016 8:47 am, edited 1 time in total.
Pipedreams
Club Member
 
Posts: 118
Joined: Fri Feb 28, 2014 3:14 pm
Location: Ludvika/Sweden

Re: Pipedreams ST205, 5S-GTE BEAMS

Postby abraxxa » Mon Jun 27, 2016 6:31 am

Good to know that there are no mechanical problems with the center diff, thanks!
You mentioned earlier that some modifications are required to the VVTi oil line.
facelift ST205
User avatar
abraxxa
Club Member
 
Posts: 539
Joined: Tue Oct 04, 2005 5:08 pm
Location: Vienna, Austria

Re: Pipedreams ST205, 5S-GTE BEAMS

Postby Pipedreams » Mon Jun 27, 2016 8:48 am

That's if you're not using the beams block.
Pipedreams
Club Member
 
Posts: 118
Joined: Fri Feb 28, 2014 3:14 pm
Location: Ludvika/Sweden

Re: Pipedreams ST205, 5S-GTE BEAMS

Postby abraxxa » Mon Jun 27, 2016 2:11 pm

Ah great!
Anything against using it? Any weaknesses or other issues?
facelift ST205
User avatar
abraxxa
Club Member
 
Posts: 539
Joined: Tue Oct 04, 2005 5:08 pm
Location: Vienna, Austria

Re: Pipedreams ST205, 5S-GTE BEAMS

Postby Pipedreams » Mon Jun 27, 2016 2:36 pm

It's cast excactly the same as a 3sgte except the vvt oilfeed.
Pipedreams
Club Member
 
Posts: 118
Joined: Fri Feb 28, 2014 3:14 pm
Location: Ludvika/Sweden

Previous

Return to My Project

Who is online

Users browsing this forum: No registered users and 3 guests