Mon Feb 08, 2016 10:46 pm
Mon Feb 08, 2016 11:41 pm
Tue Feb 09, 2016 12:39 pm
mkernz22 wrote:A)stock bypass valve/aftermarket BOV.
C)stock catch can.
D/E) Your A/C Idle Up Valve.
Tue Feb 09, 2016 5:35 pm
Mon Feb 15, 2016 3:07 pm
Mon Feb 15, 2016 10:59 pm
Thu Mar 10, 2016 1:37 pm
Sat Mar 12, 2016 2:30 am
plaidward wrote:Here's a bit of the madness that has been this harness. I've started labelling every cut wire and have a good idea where almost all of them are going.
For example, this guy goes to the horn switch. and the image below is where I figured that out. It's also labelled on the bottom where the information is in the Electrical Wiring Diagram (EWD).
I need some help with pins 1 and 8 below. They arent labelled or shown in the EWD I have!
I need some help with the pink/black or red/black pin below. Not labelled or shown in the EWD I have!
The other 2 are ABS, which I don't have.
Here's another example of the cut wires. And where this wire comes from in the image below this one.
I need some help with the light green/black wire below. Anyone know where this goes?
Lastly, what's the best way to pull off the down pipe and CAT? I can't get to 2 bolts and stipped them in frustration.... Probably will have to pull the headers now, but I'd rather not.
Mon Mar 14, 2016 11:36 am
SkagTits165 wrote:plaidward wrote:need some help
II2 pin8 orange i found was to the ecm from rear light relay. I am going by my old notes and believe it was from the running lights.
pin 1 brown wasn't on my harness, but if you meter it to the other brown on pin11, you may find it is just another ground point
IJ2 pink/black is part of the economy ac system. I removed ac so i deleted it
white/blue seemed to be a spare to the check connector on my harness
white/red also seemed to be another spare to the check connector
Wed Feb 01, 2017 5:36 pm
Fri Apr 28, 2017 1:52 am
© 2015 AllTrac.net
phpBB Mobile / SEO by Artodia.