91 alltrac
Member
several issues
if you use the manifold spacer then you will need a 1" spacer to mate the dp to midpipe. not a big problem, I just used 2 3/8" collector flanges (from muffler shop) and 3 gaskets to make a sandwich.
I was able to use the top hole of the return pipe and secure it to ones of it orignal mounting holes, maybe this is due to the spacer. I did not need to cut it off.
I had to cut a 1" section of the oil feed line brace/bracket so that I could bend the line to fit.
I had to cut the water line from the water neck since it would not clear the gearbox. not a big issue, flared the end and ran new water hose.
I had to use an st185 return rubber hose since its 1/2" longer and wanted the extra rubber for my own peace of mind.
your no longer able to use the turbo stay/brace. I would like some extra support. maybe later on make a brace.
I am currently using the stock wta but have a 205 in the shed.
not too bad, fairly straight forward. hardest part was getting the right parts to make it work and taking care in bending the oil lines.
if you use the manifold spacer then you will need a 1" spacer to mate the dp to midpipe. not a big problem, I just used 2 3/8" collector flanges (from muffler shop) and 3 gaskets to make a sandwich.
I was able to use the top hole of the return pipe and secure it to ones of it orignal mounting holes, maybe this is due to the spacer. I did not need to cut it off.
I had to cut a 1" section of the oil feed line brace/bracket so that I could bend the line to fit.
I had to cut the water line from the water neck since it would not clear the gearbox. not a big issue, flared the end and ran new water hose.
I had to use an st185 return rubber hose since its 1/2" longer and wanted the extra rubber for my own peace of mind.
your no longer able to use the turbo stay/brace. I would like some extra support. maybe later on make a brace.
I am currently using the stock wta but have a 205 in the shed.
not too bad, fairly straight forward. hardest part was getting the right parts to make it work and taking care in bending the oil lines.