Switch to full style
Write ups and tutorials for maintenance and modifications.
Post a reply

How to remove breather tube from valve cover

Fri Apr 28, 2017 9:49 pm

I want to swap this out for an AN fitting. Can anyone advise on how to remove it? (top right of pic) Is this press in? Any info would be helpful. Thank you!

https://www.dropbox.com/s/j4h61dtjucr1zmi/IMG_3950.JPG?dl=0
Members don't see the above ad. Register now

Re: How to remove breather tube from valve cover

Sat Apr 29, 2017 3:56 am

I clamped the tube in a vise and rotated the vc left/right while pulling back on it. I replaced it with the racerx piece http://racerxfabrication.com/mr2-celica/misc/valve-cover-an-fittings

Re: How to remove breather tube from valve cover

Sat Apr 29, 2017 11:09 am

Thanks for the info! Did you also replace the pcv valve? I have a gen3 motor and am wondering if I should keep it or not. I see racerx also has a press in replacement for that as well.

Re: How to remove breather tube from valve cover

Sun Apr 30, 2017 1:24 am

CELL_PROTOTYPE_X wrote:Thanks for the info! Did you also replace the pcv valve? I have a gen3 motor and am wondering if I should keep it or not. I see racerx also has a press in replacement for that as well.

I left that one stock..
Post a reply