about ignition system:
stock engine has 2 inductive sensors on crank and camshaft.
I have changed its on hall sensors and made crank disc with 2 tooths (as a 60-2 Motronic ignition. system). Dwell board has mod for max power ignition coils.
About engine:
stock has CR 9.0:1, 260hp for ct20b with specific manifold.
My engine has CR 8.9:1, JE 86.5mm pistons set, 1.5mm gasket, 264 HKS camshafts with adj. cam gears, titanium retainers and plates, very strong springs, polished and drilled int., exh. ports for head and some works...
I have some experiment for some camgears, such as: stock from st185 (4,285 main .diff.ratio), 4.83 (Toyota Rav4) was very power on low RPM, but not enough for max boost and 4.11 (form Toyota Carina ED 4wd st205) very good for turbocharged engine and a good max boost.
I think 3.93 will be very good for max power.
Thank you very much for the great attention
Alex