ASI Radiators: Pics P.16; Info P.17 & 18

Q&A regarding engines, turbos, and intercoolers and power upgrades

Postby 935motorsports » Tue Nov 06, 2007 7:00 am

Keep in mind that while $275 sounds really cheap, typical china radiators are less then $200 because they make over 100 pieces at a time.

The higher price will be for the lower quantity.

Once they are done, I can purchase a quantity so that there is no group buy required. When they come in, I will retail them and stock them.
Members don't see the above ad. Register now - it's free!
935motorsports
Established Member
 
Posts: 1686
Joined: Fri Aug 06, 2004 3:20 pm

Postby Rick89GTS » Tue Nov 06, 2007 7:00 am

OK, he gave me the same quote with shipping included:

US$300 shipped anywhere in USA
US$325 shipped anywhere in Canada

Shipping costs of the sample radiator have to be defined and then it should be a GO.
User avatar
Rick89GTS
GTFour God
 
Posts: 3747
Joined: Sun Aug 08, 2004 6:28 am
Location: Great White North, Canada

Postby asiperfrmance » Tue Nov 06, 2007 11:23 am

yeah:

US$300 shipped anywhere in USA
US$325 shipped anywhere in Canada

hi guys ,from now then ,asiperformance answer all your questions here.
any questions,feel free to ask me .we try to have it reply in an hour.

thanks guys

kevin wang
MSN:asiperformance@hotmail.com
asiperfrmance
 


Postby 88st165 » Tue Nov 06, 2007 6:05 pm

damn this is tempting and my pockets are currently empty! about when is this going to happen so i can make sure i can get in on this.
Red st165 - Garage Queen turned wannabe track rat
White st165 - slapping back together and hoping for the best
Black st165 - gone
2011 FA5 - Family Truckster
User avatar
88st165
Established Member
 
Posts: 2362
Images: 2
Joined: Sat May 14, 2005 4:09 pm
Location: Chicago, IL

Postby Rick89GTS » Tue Nov 06, 2007 8:31 pm

Excellent, Kevin Wang is now an All-Trac Member and we can deal with him directly. Welcome aboard, ASI :D

Guys, this deal will happen as soon as we can get a sample radiator into Kevin's hands. He has agreed to deduct the cost of shipping a radiator to him off the sender's order. I will post the address he's given me shortly. In the meantime, who can ship him an old radiator to use as a template?
User avatar
Rick89GTS
GTFour God
 
Posts: 3747
Joined: Sun Aug 08, 2004 6:28 am
Location: Great White North, Canada

Postby asiperfrmance » Wed Nov 07, 2007 11:44 am

Rick89GTS
thank you :)
we now waiting for the sample radiator,then we could forward this arrangement ASAP.
asiperfrmance
 


Postby BLOWNTACO » Wed Nov 07, 2007 2:36 pm

Do you all make one for the ST185's? Short attention span, can't remember. I must be losing it!
A wise and frugal government, which shall leave men free to regulate their own pursuits of industry and improvement, and shall not take from the mouth of labor the bread it has earned - this is the sum of good government.
-Thomas Jefferson
BLOWNTACO
Club Member
 
Posts: 624
Joined: Mon Oct 10, 2005 6:55 pm
Location: North Carolina

Postby daveryan » Wed Nov 07, 2007 8:17 pm

Do you all make one for the ST185's? Short attention span, can't remember. I must be losing it!


The original ebay link is for the ST185.


Also, I have the 40mm Golpher and it pushes the fan shroud into the stock turbo - the shroud has to be bent a little. This ASI rad is even thicker at 56mm! Aftermarket fan may be required. :shrug:
1990 ST185
User avatar
daveryan
Club Member
 
Posts: 421
Joined: Mon Aug 09, 2004 4:30 pm
Location: Indianapolis

Postby Rick89GTS » Thu Nov 08, 2007 5:51 am

^Good point. We should measure the ST165 radiator clearance to ensure a proper fit.

Kevin: do you have other core sizes smaller than 56mm? The factory one is about 32mm.
Last edited by Rick89GTS on Fri Jan 25, 2008 5:14 am, edited 2 times in total.
User avatar
Rick89GTS
GTFour God
 
Posts: 3747
Joined: Sun Aug 08, 2004 6:28 am
Location: Great White North, Canada

Postby 88st165 » Thu Nov 08, 2007 7:44 am

i also am concerned about fitment b/c with the twin entry swap it locates the turbo closer to the rad that i had to use an aftermarket slim fan on the stock rad..... so if i bought this and it didnt fit i would be sad :cry:

but then again i can put it in my other 165.... 8)
Red st165 - Garage Queen turned wannabe track rat
White st165 - slapping back together and hoping for the best
Black st165 - gone
2011 FA5 - Family Truckster
User avatar
88st165
Established Member
 
Posts: 2362
Images: 2
Joined: Sat May 14, 2005 4:09 pm
Location: Chicago, IL

Postby Rick89GTS » Thu Nov 08, 2007 10:08 pm

Kevin from ASI has informed me that they have 3 core sizes:
42mm, 52mm and 56mm.

Since OEM core size is 32mm, I'm thinking we go with 42mm to avoid any fitment issues. Any thoughts?
User avatar
Rick89GTS
GTFour God
 
Posts: 3747
Joined: Sun Aug 08, 2004 6:28 am
Location: Great White North, Canada

Postby RedCelicaTRD » Thu Nov 08, 2007 11:54 pm

Any way they could do both sizes and let people choose?
Wayne
1990 All Trac
2017 SRT Challenger Hellcat
Grumpy Moderator
RedCelicaTRD
GTFour God
 
Posts: 3947
Joined: Sun Aug 08, 2004 6:58 pm
Location: Syracuse, UT

Postby 86turboswap » Fri Nov 09, 2007 1:45 am

Yea I need the 56mm and I am running SPAL fans so clearance shouldn't be a issue.
User avatar
86turboswap
Club Member
 
Posts: 355
Joined: Sat Oct 20, 2007 6:59 pm
Location: Coolidge/Phoenix, AZ

Postby 86turboswap » Mon Nov 12, 2007 2:10 am

Ok this is retarded someone needs to step up with the stock radiator.
User avatar
86turboswap
Club Member
 
Posts: 355
Joined: Sat Oct 20, 2007 6:59 pm
Location: Coolidge/Phoenix, AZ

Postby gpmarzan » Mon Nov 12, 2007 2:28 am

Man, where was the thought of an upgraded intercooler last winter? I spent $300 getting the stock rad from 935motorsports and I just dumped my old rad right away. :doh:
Patrick M.
st165

Image
User avatar
gpmarzan
Established Member
 
Posts: 1537
Joined: Mon Sep 06, 2004 9:28 pm
Location: Greenwood, IN

PreviousNext

Return to Performance and Power

Who is online

Users browsing this forum: No registered users and 2 guests