Oil lines for a T3 turbo

S

scemracing

New member

• Dec 5, 2004

• #1

Besides the WRX top mount I also picked up a freshly rebuilt T3 it isnt huge but I think it will work fine for a replacement turbo. Where on the block do I get the oil feed do I plug up the stock one and get oil from somewhere else or is the stock one taped so I could use earls fittings and a S.S. line to feed my turbo. I know with the return I will just make a new hose to fit the stock oil pan drain.
Thanks
Jason

 

S

scemracing

New member

• Dec 5, 2004

• #2

I know people on here have installed a t3/t4 on there All-Trac can someone please help me out with where to feed the turbo with oil from is there some where to pull out a plug on the head, block can someone please help me.

 

P

pog0

New member

• Dec 6, 2004

• #3

Not too sure why you have a WRX TMIC but yeah.

I believe on the block there should be a HUGE 27mm banjo bolt... and thats where the oil feed comes from.

 

Q

Qlynxer

New member

• Dec 6, 2004

• #4

The stock oil feel is this huge banjo bolt , it sits under the turbo, to the right of the oil filter. Check out KO racing's website. They sell an adapter so you can screw on a -3an oil feed line. Here's a link http://www.koracing.net/products.html

 

9

92 All-Trac

Member

• Dec 7, 2004

• #5

Yea definately pick up that piece if you can. I fabricated my own fittings to the stock feeds when I installed my T3/T4. It was a royal PITA. I am going to get that banjo bolt as soon as I have the time to install some things.