Upgraded CT26 in ST165?

I searched but nothing came up ... I got info that it MIGHT work, but what exactly do I have to do?

It would be a 100% SUPRA CT26 - upgraded... onto a STOCK ST165 3SGTE?

I just have to CLOCK the housings on the new Supra-Turbo accordingly?
And fabricate some sort of bracket to use the old ST165-CT26-Wastegate or just use 1 hole on the Supra-Turbo-Housing?
Can I just use the Supra WG instead?

thanks

Works fine, I have a 54 trim supra ct26 on mine.

Clock turbo
Figure out drain/feel oil lines
The mount that goes under the turbo to the block isnt quite right either but works without modification.
The wastegate is a little bit of a pain in the ass but it works. I couldnt even tell you which one Im running, but it is a tight fit.

Turbo feels good too, Im hoping to add a boost controller over the next few months and crank her up...

ive got a supra CT in the stock location with the stock wastegate on my 165. all you need to do is clock the housing slightly and drill out one of the bosses on the cold side of the turbo so there is two mounting holes for the waste gate bracket instead of just one.