Anyone with a clocked wastegate bracket

Q&A regarding engines, turbos, and intercoolers and power upgrades

Re: Anyone with a clocked wastegate bracket

Postby msanders2 » Wed Jul 16, 2014 10:03 pm

Mr Alltrac, I think it would be easier if you pm Klue, as you would be the one actually making the brackets for us fine folk.
Members don't see the above ad. Register now - it's free!
msanders2
Club Member
 
Posts: 365
Joined: Tue Jan 18, 2011 1:59 am
Location: Buchanan, Ga

Re: Anyone with a clocked wastegate bracket

Postby CTechBlueDragon » Thu Jul 17, 2014 2:03 pm

I have had 2 different types fabbed up for my car. For CT26 based housings you can use the 3 mounting points on the compressor to make a decent bracket. But with a ct20b it becomes more complicated because of only 2 mounting points which are basically useless once you clock it. For the 20b I made 2 pieces, one goes down to the mount on the bottom of the exhaust housing that supports the turbo for the top hole on the wastegate and I made one to connect to the tranny for the bottom hole. Also another problem the housing gets fatter as you rotate it so the stock bracket has to be trimmed on the back which weakens it. I had access to a plasma cutter and breaks and stuff when I made the last set of mounts now I do not. I can post some pics if you guys are interested.
CTechBlueDragon
Club Member
 
Posts: 204
Images: 50
Joined: Sat Mar 17, 2012 1:12 am

Re: Anyone with a clocked wastegate bracket

Postby Mr Alltrac » Thu Jul 17, 2014 2:56 pm

Please do, some measurements would be great too. :)
Mr Alltrac
Club Member
 
Posts: 441
Images: 0
Joined: Sun Dec 01, 2013 10:35 pm

Re: Anyone with a clocked wastegate bracket

Postby FC Zach » Tue Jul 29, 2014 2:49 pm

Not sure if these pics would help or not but I had found these somewhere on the forum while searching a while back. .
Image
Image
Image
Attachments
actuatorbracket086.jpg
(55.79 KiB) Not downloaded yet
actuatorbracket081.jpg
(50.39 KiB) Not downloaded yet
actuatorbracket019.jpg
(59.65 KiB) Not downloaded yet
Last edited by FC Zach on Tue Jul 29, 2014 4:03 pm, edited 6 times in total.
1992 Toyota Celica AllTrac
1987 Mazda RX7 Sport
1979 Yamaha G1A, rotary powered with Sachs KM24
1976 Hercules W2000, oil injected
User avatar
FC Zach
Club Member
 
Posts: 818
Images: 9
Joined: Mon May 20, 2013 7:43 am
Location: Eagleville, TN

1992 Toyota Celica

Re: Anyone with a clocked wastegate bracket

Postby FC Zach » Tue Jul 29, 2014 2:54 pm

Last pic from the same build above.
actuatorbracket121.jpg


Here's another pic I had saved for an idea on how to do the index, this setup looks easier to do for those without a welder.
FMIC12.jpg
1992 Toyota Celica AllTrac
1987 Mazda RX7 Sport
1979 Yamaha G1A, rotary powered with Sachs KM24
1976 Hercules W2000, oil injected
User avatar
FC Zach
Club Member
 
Posts: 818
Images: 9
Joined: Mon May 20, 2013 7:43 am
Location: Eagleville, TN

1992 Toyota Celica

Re: Anyone with a clocked wastegate bracket

Postby Mr Alltrac » Tue Jul 29, 2014 4:06 pm

I'm looking for a fmic right now, this weekend I will probably pull my car apart and build a template hopefully, the seller I'm talking to finds his piping so I can make sure it works perfect.

I'm hoping I can make one that clears everything and will run with the turbo in factory postion just with a detached wastegate, so I can start replicating them. I'll check to make sure it clears with turbo clocked before I start my little production run of them. Hopefully I can one up with some pictures by this weekend.
Mr Alltrac
Club Member
 
Posts: 441
Images: 0
Joined: Sun Dec 01, 2013 10:35 pm

Re: Anyone with a clocked wastegate bracket

Postby gt4tified » Wed Jul 30, 2014 10:42 am

Subscribed.

+1 for clocked ct20b wg bracket.
ST185 JDM GT-FOUR RC- "White Trash"
[url=http://imageshack.us][img]http://img231.imageshack.us/img231/8264/dynographsmallstretchedmu9.jpg[/img][/url]
gt4tified
GTFour God
 
Posts: 3151
Images: 5
Joined: Wed Mar 30, 2005 3:22 pm
Location: Trinidad, W.I.

Re: Anyone with a clocked wastegate bracket

Postby Mr Alltrac » Thu Jul 31, 2014 10:08 pm

Is the ct20 located in the same place as the ct26?
Mr Alltrac
Club Member
 
Posts: 441
Images: 0
Joined: Sun Dec 01, 2013 10:35 pm

Re: Anyone with a clocked wastegate bracket

Postby UtahSleeper » Fri Sep 12, 2014 7:35 pm

Love the simplicity of the second mount for the wastegate. I may have to try and do this.
80 Corolla Hatchback - Power (In Progress) http://www.3tcgarage.com/viewtopic.php?f=23&t=3208
88 Alltrac - Snow (Waiting for the garage) http://www.alltrac.net/phpBB2/viewtopic.php?f=44&t=43482

Cardomain - http://www.cardomain.com/id/chris52580
User avatar
UtahSleeper
Established Member
 
Posts: 1917
Joined: Thu Feb 01, 2007 6:00 pm
Location: Magna, UT

Previous

Return to Performance and Power

Who is online

Users browsing this forum: No registered users and 5 guests