Wed Aug 02, 2017 3:17 am
Wed Aug 02, 2017 4:52 am
wilhelm101 wrote:Apexi Power FC plus and hand controller
wilhelm101 wrote:Shard 800cc Injectors
wilhelm101 wrote:Semi Sealed H/beams and HID xenon kit (think this will be illegal and blind people)
Wed Aug 02, 2017 5:05 am
Wed Aug 02, 2017 5:13 am
Wed Aug 02, 2017 5:18 am
Wed Aug 02, 2017 5:21 am
wilhelm101 wrote:Thanks FC Zac. Interested in your light set up. Is it much of a job to convert?
wilhelm101 wrote:My parts box also included a new pair of semi-sealed headlights. Not sure why the need to replace the whole unit, would these be useful for conversions later down the track?
wilhelm101 wrote:Glad I'm not the only one who finds the xenons obnoxious, thought I might be just irritable lol.
Wed Aug 02, 2017 6:55 am
Wed Aug 02, 2017 7:14 am
underscore wrote:As for the lights I'd be half tempted to smash them to bits, but I have a very strong dislike of aftermarket headlights.
wilhelm101 wrote:Yep the semi sealed takes an H4 FC Zac, which I assume is an approvement on the stock headlights.
wilhelm101 wrote:We have a lot of problems hitting wallabies and kangaroos down here so might be worth upgrading.
Wed Aug 02, 2017 12:39 pm
Wed Aug 09, 2017 11:45 am
f3ared wrote: They all had a myriad of issues that would crop up - best one i can remember is the car running a full point richer with the headlights on
Wed Aug 09, 2017 9:08 pm
diceman wrote:f3ared wrote: They all had a myriad of issues that would crop up - best one i can remember is the car running a full point richer with the headlights on
Interesting you mention this as a few have found the same issue with other ECUs on the 3sgte as well. It is thought that the issue is related to the vehicle wiring arrangement rather than ECU as the stock loom feeds 12V to injectors from a different location to the ECU 12V and hence whilst the ECU sees a drop in voltage due to electrical load the injectors may not (or less so). Whilst it's possible to compensate in the INJ vs Voltage fuel trim the ideal scenraio is for all componenst to see the same voltage but that requires a new loom for engine etc being built.
© 2015 AllTrac.net
phpBB Mobile / SEO by Artodia.