Okay folks, I have tested out the units and have decided on final pricing.
$100 per set ex shipping and as I can't be bothered priming etc, I am removing that option availability. I am assuming that most people will be able to sand and prime to the colour of their own car.
What you get:
1x LH Folding mirror
1x RH Folding mirror
1x Mirror Control Module
1x Switch
All wired up in working order, ready to apply positive and negative for your own testing at home. It is the purchaser job to extend wiring as required. I recommend a 15A fuse on the power.
This is the list of people who will be offered the sets as in order of contact:
sheikhas
klue
MixMaster
minus alltracshoak and AvivB who pulled out.
PM's coming your way soon with freight estimate as well. Paypal accepted unless you want to use credit card which will incur a 3% surcharge.
As you can see, I did a little work to get everything up and running. I used this thread to establish the wiring:
Link
I also found out that the there are no differences between the mirror control relay modules 87989-20020 and 87989-20030. Both work the same as shown in the video.
Set A: More weathered paint of the two sets, but does come with mirror heater wiring. I only know that white/black stripe is ground, so its up to the purchaser to figure out the heated mirrors wiring. Uses 87989-20030 module.
Set B: I had a spare LH mirror, so used that to make up the set. It has better paint and the relay control plug does not have the correct wiring code as per the diagram in the thread link. I have provided another wiring diagram with colour codes and as said previously, the set is already prewired to test with postive and negative. Uses 87989-20020.
While I am here, there are some other bits and bobs to show in working order:
Spare Switch Working
Supra Switch Working (which incidently is the same as the celica switch).