Switch to full style
Suspension and other discussion
Post a reply

Re: The ST185 wheel size thread (offsets, widths, etc)

Fri Jun 17, 2016 2:09 pm

Hi guys..

10x17 et30 rear (spacer?)

8.5x17 et30 front (spacer? )

Can I make these wheels fit? Will roll fenders.
Members don't see the above ad. Register now

Re: The ST185 wheel size thread (offsets, widths, etc)

Fri Jun 17, 2016 4:54 pm

none in front 15mm in back

Re: The ST185 wheel size thread (offsets, widths, etc)

Fri Jun 17, 2016 6:24 pm

So they will fit with a 15mm spacer in the back.

Re: The ST185 wheel size thread (offsets, widths, etc)

Fri Jun 17, 2016 6:46 pm

Image

Thought this was relevant.
18x10+12 square 265/35
No spacers here.

Sent from my XT1585 using Tapatalk

Re: The ST185 wheel size thread (offsets, widths, etc)

Fri Jun 17, 2016 7:06 pm

10J fit the ST185 front axle???
Bonkers!!!
Whats the offset?

Re: The ST185 wheel size thread (offsets, widths, etc)

Fri Jun 17, 2016 7:42 pm

So far I've got full lockout and no rub at all, took awhile to adjust and roll/pull the fenders to make it work,
As mentioned before they are ;
18x10 (+12)
It isn't lowered much tbh, maybe 2 inches so everything sits nice.
I will likely go 245/40 next set of tires so I can get another inch drop.

Image
Image
On some trash Chinese tires atm just to get the fit right and while it sits waiting for another swap I figure I'd get it closer to done.

Sent from my XT1585 using Tapatalk

Re: The ST185 wheel size thread (offsets, widths, etc)

Sat Oct 22, 2016 7:12 pm

a photo with Compomotive TH3, I searched the post and google but I have not found

Thank you

Re: The ST185 wheel size thread (offsets, widths, etc)

Mon Oct 24, 2016 12:55 am

What about the plastic guard liners?

My front wheels do not rub on the guards, but rub on the plastic guard liners when cornering hard and a bump. The ares is where the liner curves from horizontal to vertical and fits onto the steel guard.

So what do you do?
a) Remove and throw away the plastic liner?
b) Cut and modify the liner some how?
c) Don't worry about it, ignore the noise it makes when it rubs and wait for the tire to rub a hole through it? lol

Re: The ST185 wheel size thread (offsets, widths, etc)

Mon Oct 24, 2016 2:09 am

^ the technical term for option C is "self clearancing" :wink:

Re: The ST185 wheel size thread (offsets, widths, etc)

Mon Oct 24, 2016 12:27 pm

I bought a second liner then uses pieces and a plastic welder to increase the size of the liners.

Re: The ST185 wheel size thread (offsets, widths, etc)

Sat Oct 29, 2016 2:50 pm

Can anyone identify this wheel and tire set up for me?

http://3.bp.blogspot.com/-rS355nhNeMA/U ... r-sale.jpg

Thanks!

Re: The ST185 wheel size thread (offsets, widths, etc)

Sat Oct 29, 2016 6:38 pm

xbeatxdownx wrote:Can anyone identify this wheel and tire set up for me?

http://3.bp.blogspot.com/-rS355nhNeMA/U ... r-sale.jpg

Thanks!

That car was on bring a trailer not too long ago. Search "Celica" on that site and you will find the car. Should have some more pics. They look like a compomitive or a Sparco wheel.

Re: The ST185 wheel size thread (offsets, widths, etc)

Sun Oct 30, 2016 9:55 pm

CSAlltrac wrote:
xbeatxdownx wrote:Can anyone identify this wheel and tire set up for me?

http://3.bp.blogspot.com/-rS355nhNeMA/U ... r-sale.jpg

Thanks!

That car was on bring a trailer not too long ago. Search "Celica" on that site and you will find the car. Should have some more pics. They look like a compomitive or a Sparco wheel.


That's actually where I ran across the picture in the first place. Reverse google imaged it and so fourth, but didn't have too much luck locating any information on it (the seller posted about ten words when trying to sell it).

While looking at the compomitive site, it looks like the probably came from them, but tire size is more what I like on it.

Thanks for your help.

Re: The ST185 wheel size thread (offsets, widths, etc)

Mon Dec 19, 2016 5:15 am

Hey guys,

New here and I've tried my best to read and find the answers before posting about fitment and found no definitive answer.

Will 17x9 [+35mm] wheel size clear front and rear? What tires specs would fit without rubbing?

Re: The ST185 wheel size thread (offsets, widths, etc)

Thu Jan 12, 2017 5:58 pm

Hi!

Will 17x9 +25 without spacers work in the rear?
I´ll mount 235/40R17 on them.
Fenders are minimal tilted, TEIN SuperStreet already is mounted (35mm lowered to stock).

Hope for answer, I already bought them :smokes:
Post a reply