Mon Apr 10, 2017 8:01 am
Mon Apr 10, 2017 3:10 pm
Celica Turbo wrote:Hello
I installed long time ago the ST205 front brakes on my ST165 without Brake Caliper Brakets. The Brake Discs are machined down to 302 mm in diameter. I installed a 4mm Spacer between Hub and Brake disc, and on the caliper we machined down 4mm to. Brake Disc is 100% in the middle.
But the Brake Discs touch the Lower Ball Joints.
Exists there any other options to get more clearance between Ball Joint and Brake Disc?
I think, others has/had the same problems with the ST205 Discs with Diamater ~300 mm.
Thanks for your help.
freddie wrote:My 165 has 205 calipers and discs on the rear. Front 205 Calipers with Lexus IS200 Discs. 165 Master cylinder and booster.
Technical help can be found on this site and I also had help thanks to fcZach.
Master Cylinder - pedal travels a bit more. (but I will be changing to a 205 master cylinder and booster soon)
Wheels - currently running 16x7.5 inch 3 piece with 30 offset. Yes on rear the calipers hit the inside of the wheel center,
so I run 25mm thick spacers. Clearance of rim to caliper (outwards) is about 15mm.
Tue Apr 11, 2017 4:56 am
Tue Apr 11, 2017 5:55 am
Tue Apr 11, 2017 10:06 am
underscore wrote:You could try shaving down the joint a bit. Have they only recently started touching or have they always done this?
© 2015 AllTrac.net
phpBB Mobile / SEO by Artodia.