machineica
New member
hello, there i seen a few people incl myself on here scrounging for a jdm ecu for their swapped st165 motor. im tired of looking so i decided to look into the differences between which arent many.
The number one biggest is tune. jdms are tuned for 100 octane fuel.
that dont do us good here in the states.
of course theres a little more in the tune but im trying to be brief.
The second is pin out. i will be posting the differences shortly as soon as i get my scanner to work. there are small differences as far as the pinout goes.
On the JDM ecu 10pin connector theres only one difference. The lack of cold start injector pin (STJ on the usdm pinout).
The JDM 18 pin connector theres one big difference, where the fuel pressure vsv is on the jdm pin(FPU), thats where the oxygen sensor heater wire connects pin(HT). The JDM does not have a (HT) the udsm does on its 18 pin.
On the Jdm 24 pin heres where you will see a few differences.
The jdm has wiring for (TIL) turbo indicator lamp. the usdm does not.no changes as far as wiring so far.
Next on the jdm is the pin (EGW) which is where on the usdm that the (FPU) fuel pressure vsv goes.the EGW is for a exhaust temp warning light. usdm not so equipped. But where that pin is goes the usdm (FPU)
One more difference is the jdm pin (THA2) intake air sensor, usdm is not equipped with one but where that pin is goes the usdm (PIM) pin which is the important turbo pressure sensor.
Yet another and final difference, the (CCO) pin on the jdm. you dont need do do anything about it unless you have a egt equipped usdm car. In that case that pin should be (THG) that cam on cars that were calf or canadian i believe. oh (CCO) goes to the data connector on the jdm. there isnt one on the usdm.
The number one biggest is tune. jdms are tuned for 100 octane fuel.
that dont do us good here in the states.
of course theres a little more in the tune but im trying to be brief.
The second is pin out. i will be posting the differences shortly as soon as i get my scanner to work. there are small differences as far as the pinout goes.
On the JDM ecu 10pin connector theres only one difference. The lack of cold start injector pin (STJ on the usdm pinout).
The JDM 18 pin connector theres one big difference, where the fuel pressure vsv is on the jdm pin(FPU), thats where the oxygen sensor heater wire connects pin(HT). The JDM does not have a (HT) the udsm does on its 18 pin.
On the Jdm 24 pin heres where you will see a few differences.
The jdm has wiring for (TIL) turbo indicator lamp. the usdm does not.no changes as far as wiring so far.
Next on the jdm is the pin (EGW) which is where on the usdm that the (FPU) fuel pressure vsv goes.the EGW is for a exhaust temp warning light. usdm not so equipped. But where that pin is goes the usdm (FPU)
One more difference is the jdm pin (THA2) intake air sensor, usdm is not equipped with one but where that pin is goes the usdm (PIM) pin which is the important turbo pressure sensor.
Yet another and final difference, the (CCO) pin on the jdm. you dont need do do anything about it unless you have a egt equipped usdm car. In that case that pin should be (THG) that cam on cars that were calf or canadian i believe. oh (CCO) goes to the data connector on the jdm. there isnt one on the usdm.