Old Camry AllTrac with a Heart of Platinum

Camry All Trac, Previa All Trac

Old Camry AllTrac with a Heart of Platinum

Postby TOYRACR92 » Sun May 21, 2006 3:37 pm

Ok well a Friend of mine has finnally finished his
1990 Camry AllTrac Proj
it has all the Drivetrain of a 97 Celica Alltrac
The 264bhp 3SGTE Motor has been Strengthen with new Forged Pistons and rods, ported Head, ACT clutch, Fidanza Flywheel, 3"custom Downpipe all the way thru to the N1 Muffler. Custom Intercooler Plumbing, F
its even a bit more quicker with HKS F-Conn piggy back unit.
All the 97Celica AllTrac Rotors and Calipers are on it. Also the Celica Gauge Cluster has been Fabbed in.

This is a NIce Sleeper and alot of Fun

Image
Image
Image

http://www.MySpace.com/HuxRacing
Members don't see the above ad. Register now - it's free!
TOYRACR92
Newbie
 
Posts: 6
Joined: Sun May 21, 2006 3:14 pm
Location: SpaceCoast, Merritt Island FL

Postby CMS-GT4 » Sun May 21, 2006 4:02 pm

Thats a cool little car. I think some black wheels would be fitting, and maybe coating the IC black. That way no one would have any idea of what was coming. :evil:
Coldiron
92 st185 (205 swap) | 03 350Z Track (sold) | 13 Pilot | 17 Mazda3
www.noritoy.com | noritoy.deviantart.com | http://www.alltrac.net/phpBB2/viewtopic.php?f=44&t=19891
User avatar
CMS-GT4
GTSilver Member
 
Posts: 10345
Images: 7
Joined: Mon Aug 09, 2004 9:12 pm
Location: St Louis Area (IL)

1992 Toyota Celica

Postby Gary ST165 » Sun May 21, 2006 4:10 pm

:sleeper mode:

reminds me of: Image I pity the fool!

:sleeper mode:


Great project 8)
ST165 turbo 4WD
ST185 GT-FOUR RC Carlos Sainz Limited Edition 825•5000
ST185 turbo 4WD Carlos Sainz Limited Edition 2541•5000

Image
User avatar
Gary ST165
Established Member
 
Posts: 1524
Images: 0
Joined: Sun Jan 01, 2006 10:11 pm
Location: United Kingdom

Postby alltracman78 » Wed May 24, 2006 12:45 am

Not bad, but a hood scoop and a huge fmic hardly qualify as "sleeper".
:D
Image
User avatar
alltracman78
GTFour God
 
Posts: 4677
Joined: Mon Aug 09, 2004 9:04 am
Location: Ma

Rust ?

Postby GMan » Fri May 26, 2006 11:53 pm

I have not seen many, if any; Camries without rust.
Needs a few dents & dings and a bit of dirt, and it will be Invisble. :-)

Cool project !

Regards;
GMan
Gold Member
 
Posts: 1163
Joined: Mon Aug 16, 2004 8:12 pm
Location: Boston, MA USA

Postby wizzards581 » Thu Jul 13, 2006 1:48 am

camry's i seen dont have rust. my family have a few and no rust.
-90 celica turbo All-Trac (sold)
-03 matrix XR
wizzards581
Established Member
 
Posts: 1362
Joined: Fri Jan 06, 2006 1:20 am
Location: Nor Cal

Postby Gary » Thu Jul 13, 2006 2:00 am

wizzards581 wrote:camry's i seen dont have rust. my family have a few and no rust.

That's because they don't use salt on the road in CA. :wink:
93 ST185
Image
Gary
GTFour God
 
Posts: 6430
Joined: Sun Aug 08, 2004 1:03 pm
Location: Carolina

Postby Brandon24pdx » Thu Feb 15, 2007 4:39 pm

Any tech info about swapping a 3S-GTE into one of these 88-91 All-trac Camrys available anywhere?
Brandon24pdx
Club Member
 
Posts: 23
Joined: Wed Jan 31, 2007 4:09 pm

Postby 2RM » Thu Feb 15, 2007 11:37 pm

I have seen a Turbo 4WD Camry before but it was a diesel and it was in Europe. :P
User avatar
2RM
Club Member
 
Posts: 655
Joined: Mon Mar 27, 2006 11:49 pm
Location: Fairfax VA

1992 Toyota Celica

Postby alltracman78 » Wed Apr 18, 2007 11:45 pm

Brandon24pdx wrote:Any tech info about swapping a 3S-GTE into one of these 88-91 All-trac Camrys available anywhere?


Should be pretty cake.
They came stock with the 3SFE, so same family.
Mechanicals should bolt right up.
You probably want to use a Celica Alltrac trans, if the prop shaft and driveshafts will bolt up to it.

Wiring will be the hardest part most likely.
Image
User avatar
alltracman78
GTFour God
 
Posts: 4677
Joined: Mon Aug 09, 2004 9:04 am
Location: Ma

Postby Mafix » Thu Apr 19, 2007 12:55 am

actually if you stick to a gen 2 motor (1990) it should drop right in with a GTE harness and plug and go.
Mafix
Gold Member
 
Posts: 5877
Joined: Tue Aug 10, 2004 10:56 pm

Postby TheAutoholic » Thu Apr 19, 2007 1:29 am

Mafix wrote:actually if you stick to a gen 2 motor (1990) it should drop right in with a GTE harness and plug and go.

Really?
Hmmm :D
Currently All Trac-less....

Dracov wrote:I'm firmly convinced GT-Four trannies are made from collapsed stars.
User avatar
TheAutoholic
Club Member
 
Posts: 463
Joined: Wed May 31, 2006 12:26 am
Location: Tomazsow, Poland, and Kansas City, USA

Postby alltracman78 » Fri Apr 20, 2007 5:42 pm

Mafix wrote:actually if you stick to a gen 2 motor (1990) it should drop right in with a GTE harness and plug and go.


What?

How do you figure.

You are saying the 3SGTE wiring harness will connect right up to the Camry chassis harnesses?
Unless you have personally done it, or seen it first hand, I really doubt it would.
Image
User avatar
alltracman78
GTFour God
 
Posts: 4677
Joined: Mon Aug 09, 2004 9:04 am
Location: Ma

Re: Old Camry AllTrac with a Heart of Platinum

Postby not12listen » Thu Sep 20, 2007 3:14 pm

TOYRACR92 wrote:Ok well a Friend of mine has finnally finished his
1990 Camry AllTrac Proj
it has all the Drivetrain of a 97 Celica Alltrac
The 264bhp 3SGTE Motor has been Strengthen with new Forged Pistons and rods, ported Head, ACT clutch, Fidanza Flywheel, 3"custom Downpipe all the way thru to the N1 Muffler. Custom Intercooler Plumbing, F
its even a bit more quicker with HKS F-Conn piggy back unit.
All the 97Celica AllTrac Rotors and Calipers are on it. Also the Celica Gauge Cluster has been Fabbed in.

This is a NIce Sleeper and alot of Fun

Image
Image
Image

http://www.MySpace.com/HuxRacing


can you do me a huge favor? ask your friend if he used the Camry drive shaft or the Celica drive shaft...

my wife wants to get her AllTrac Camry going. :)
not12listen
Club Member
 
Posts: 299
Joined: Tue Aug 31, 2004 6:37 am
Location: SF Bay Area, Ca

Postby GMan » Fri Sep 21, 2007 2:43 am

> alltracman78
> Location: Franklin Ma
> Posted: Wed May 24, 2006 12:45 am Post subject:
> Not bad, but a hood scoop

He Was using a stock A/A for a time Before he put on the fmic.

> and a huge fmic

The FMIC Could be a fake ? :-)
Just an intake....

> hardly qualify as "sleeper".

All in the eye of the beholder. It is "Only' a Camry.

Bringing on an Old Thread back to life.

Regards;
GMan
Gold Member
 
Posts: 1163
Joined: Mon Aug 16, 2004 8:12 pm
Location: Boston, MA USA


Return to Other All Tracs

Who is online

Users browsing this forum: No registered users and 1 guest

cron