Okay, Look what I found back from sometime last year, and after long time searching crap that I had lying around. And I Redid it so its easier to understand, I think.
here's how it works:
The first color will be the wire from the mirror, and the second will be the wire from underneath the tweeter cover(if you have system 10) (This is the same as the harness color coming from the Relay, I assume?)
Left Mirror
------------
Light Green->Blue
Blue->Brown
Brown->Brown/white
Red->Brown/Red
Black->Brown/yellow
Dark Green->Yellow
Yellow->Dark Green
Right Mirror
-------------
Light Green->Blue/White
Blue->Blue/Red
Brown->Light Green
Red->Light Green/Red
Black->Light Green/Black
Dark Green->Green/Yellow
Yellow->Red/Yellow
Retract Function
------------------
This I'm not too sure about, so I'll just provide what I have in front of me. If you can make sense of this, please let me know.
The way this section works is with the colors relating to the mirror colors, and not the harness colors. (These colors are the ones on the left in the lists above)
|+| to Light Green ----------(M)------------- |-| to Yellow <__Retract
|-| to Light Green -----------(M)------------- |+| to Yellow <__Extend
Blue wire is High (+12V) EXCEPT when Retracted
Dark Green wire is high (+12V) EXCEPT when Extended
If you are able to decipher the retract sention, please post, so maybe we can get this one stickied. And I would enjoy finally putting my mirrors on. I've recently been having bad thoughts about selling them. I don't even know where the heck the relay fits into the puzzle with regards to the switch for adjusting the mirrors and the retract button.
The only person I know for sure that has done this is Roo. The information in this post was taken from an email that he was involved in. Credit should be given to OzGT4 (Albert Bult)