project NIN

Talk about your project car here

project NIN

Postby ulis_m86 » Sun Apr 26, 2009 11:06 am

hello fellow celica enthusiasts,
never got to introduce myself properly ive been a celica fan since i was in high school about 5 or 6 yrs ago started off buying a 91 gts for $300 and had to rebuild the engine. couple yrs later after a few more rebuilds headgaskets and new engine i decided id do a 3s swap. saddened by the fact that i will never have awd drive i found an alltrac not too far from me for 4k and instantly jumped on it even though its in very poor shape. but at least being in cali it has no rust. ive been meaning to start a project page ive been taking pictures with my phone for a while now and im finally getting around to uploading them. theres really nothing special after being a poor hs student i became a poor college student and now that i finally got a good job im looking to buy a house and looking forward to getting married. so dont expect nothing fancy from me. a lot of things i learned are thanks to alltrac.net and celicatech.com. i thank you all! i may be an ass at times but my intentions are good any all trac owners are always welcome at my house and im more than willing to help others.
so now a bunch of very random pictures

Image
back yard parking

Image
my gts

Image

Image

straight from japan
Image

the all track
Image
Members don't see the above ad. Register now - it's free!
Image
ulis_m86
Club Member
 
Posts: 164
Joined: Fri Aug 15, 2008 12:01 pm
Location: San Bernardino CA

Postby ulis_m86 » Sun Apr 26, 2009 11:13 am

Image

Image

Image

Image
twm short shifter

Image

Image

Image
Image
ulis_m86
Club Member
 
Posts: 164
Joined: Fri Aug 15, 2008 12:01 pm
Location: San Bernardino CA

Postby ulis_m86 » Sun Apr 26, 2009 11:24 am

Image
loving speed source

Image
i need gauges

Image
rain gaurd (jdm tight)

Image
rain gaurd install kit

Image
bought my top mount wta here still havent installed it

Image
cobra heat exchanger

Image
eclipse head unit wiring
Image
ulis_m86
Club Member
 
Posts: 164
Joined: Fri Aug 15, 2008 12:01 pm
Location: San Bernardino CA

Postby ulis_m86 » Sun Apr 26, 2009 11:33 am

Image
front left and right axle seperate them from the bolts and they are the same

Image
seperate them from the tranny different

Image
previous owner knew how to weld im not sure if it was a good thing???

Image
dropped the tank 3 times already and hate it

Image
ssac twin tip exhaust thanks to palladek i believe

Image
must of installed in wrong place cause i havent felt the performace gain lol
Image
ulis_m86
Club Member
 
Posts: 164
Joined: Fri Aug 15, 2008 12:01 pm
Location: San Bernardino CA

Postby ulis_m86 » Sun Apr 26, 2009 11:43 am

Image
dont ignore your turbos please

Image

Image

Image

Image
the replacement a jdm ct26 from the mr2 boards

Image
ceramic wheel ready to be shattered
Image
ulis_m86
Club Member
 
Posts: 164
Joined: Fri Aug 15, 2008 12:01 pm
Location: San Bernardino CA

Postby ulis_m86 » Sun Apr 26, 2009 11:50 am

Image
highly recommend this kit from toyota

Image

Image
throttle body gasket is cheap too

Image

Image
that clip ppl talk about
Image
ulis_m86
Club Member
 
Posts: 164
Joined: Fri Aug 15, 2008 12:01 pm
Location: San Bernardino CA

Postby ulis_m86 » Sun Apr 26, 2009 11:59 am

Image
and then theres the black and white pics of me i didnt know my brother was taking

Image
i would have posed

Image
no not really

Image

Image

thats it for now :smokes:
let me know what you guys think?
Image
ulis_m86
Club Member
 
Posts: 164
Joined: Fri Aug 15, 2008 12:01 pm
Location: San Bernardino CA

Postby klue » Sun Apr 26, 2009 6:17 pm

hey where did you get the header for the 5sfe?
facebook.com/xiiimotorsports
#xiiimotorsports ON instagram
User avatar
klue
GTFour God
 
Posts: 3893
Joined: Thu Nov 04, 2004 9:47 pm
Location: Greater Toronto Area

Postby ulis_m86 » Mon Apr 27, 2009 2:36 am

ebay link

got it on ebay from a seller named surewinproducts back then it was intended for the 6th gen celica but someone on celicatech found out it bolted up just fine. i recently removed it due to the raspy honda like sound it made combined with my catback pacetter exhaust that got rid of my resonator. maybe with a resonator it would sound cleaner. i also had to pass emmisions and the guy looked at the header and ask for a carb #.[/url][/list]
Last edited by ulis_m86 on Thu Apr 30, 2009 1:58 pm, edited 1 time in total.
Image
ulis_m86
Club Member
 
Posts: 164
Joined: Fri Aug 15, 2008 12:01 pm
Location: San Bernardino CA

Postby Terracar » Mon Apr 27, 2009 1:46 pm

Why have you had to drop the gas tank 3 times? (I'm almost scared to find out) Also that is a nice place (IMO) for the turbo timer display. Have you done a write up on it? Assuming just ran the wires though dash and bingo.

Are you running the stock TMIC right now or a FMIC ?

-Terracar
'92 'trac - Demon - currently in need of some reconstructive surgery.
User avatar
Terracar
Established Member
 
Posts: 1553
Joined: Wed Oct 03, 2007 2:47 pm
Location: Battle Ground, WA

Postby ulis_m86 » Tue Apr 28, 2009 6:55 pm

when i first bought the alltrac it would just turn off on me and leave me stranded at random. it felt to me like it had a fuel problem so i did a tune up and change the fuel filter. it continued to do that so i ordered a walbro pump but in the meantime threw in a 5sfe pump i had lying around i just jumpered the fuel pump relay at the diagnostic box like the swappers do. once the pump came in i installed it but a few weeks later it started making a really loud whining noise like it was going to blow. so i looked around and bought a supra denso pump on ebay (it was the cheapest) it was also a knock off. i installed it anyways but one day ill put a real one in there.
the fun part about all this is that it was probably just the relay cause without that jumper it will still turn off. :doh:

i could have sworn there was a write up on that turbo timer location but i cant find it. theres at least 4 other ppl on here that have it there i stole the idea from them. i bought the hks harness so it was very close to plug and play only two wires to wire up hand brake and rpm signal from ecu which was really easy with the directions. some have made a bracket to bolt up the turbo timer others have used double sided tape to hold it in place. way i did it was grind away at the hole where the clock is at. so the turbo timer barely fits forced into there. the turbo timer has a slot like where the case splits in two. thats where it is held on to. and its such a tight fit that it does not move at all.

right now im running the stock air to air top mount. im putting together the rc wta intercooler but dont want to install it untill i fix all the problems i have with it so i wont have to drain the coolant later.
Image
ulis_m86
Club Member
 
Posts: 164
Joined: Fri Aug 15, 2008 12:01 pm
Location: San Bernardino CA

Postby ulis_m86 » Sat Aug 01, 2009 7:27 pm

Image
ghetto rigging the diaphragm

Image

Image

Image
home made egr block off

Image

Image
replace your crush washers

Image
injector o ring replacement

Image

Image

Image

Image
Image
ulis_m86
Club Member
 
Posts: 164
Joined: Fri Aug 15, 2008 12:01 pm
Location: San Bernardino CA

Postby ulis_m86 » Sat Aug 01, 2009 7:32 pm

Image
broke down and bought a new tvis assembly

Image

Image

Image

Image

Image
Image
ulis_m86
Club Member
 
Posts: 164
Joined: Fri Aug 15, 2008 12:01 pm
Location: San Bernardino CA

Postby ulis_m86 » Sat Aug 01, 2009 7:34 pm

Image
speed source fpr kit

Image

Image

Image
still need to fab a mounting bracket but no leaks

Image
Image
ulis_m86
Club Member
 
Posts: 164
Joined: Fri Aug 15, 2008 12:01 pm
Location: San Bernardino CA

Postby ulis_m86 » Sat Aug 01, 2009 7:40 pm

now lets kick back and have some beers!!!
Image
Hangar 24 Orange Wheat Beer (delicious)

Image
Black and tan

Image
Obama beer? lol

a sad looking 4th gen at the junkyard
Image

Image

Image

Image
purple seats!

thats all for now enjoy!
Image
ulis_m86
Club Member
 
Posts: 164
Joined: Fri Aug 15, 2008 12:01 pm
Location: San Bernardino CA

Next

Return to My Project

Who is online

Users browsing this forum: No registered users and 3 guests

cron