I replaced the driver side bearing which was totally rooted.
Checked caliper clearance, pads, rotors etc and everything seemed ok. Put it back together, went for a spin and the grinding noise is still there.
Again it seems to be coming from the passenger side so decided to pull that side apart and see if I can find the problem
Passenger side does not sound good...
YouTube - ‪Dead bearing‬‏
Not look good....
And this is fucked beyond repair
So I purchased a press, ordered a new hub and bearing kit from toyota and got stuck into it.
Pressed out the extended wheel studs from the old hub into the new. It all went well without any dramas.
Once I put the rear bearing seal on, should be good to bolt it all back together.
TTE replicas vs OEM side mirrors... Nice little saving of 2kg (4.4 pounds) means I can upsize my meals for a little longer.