making skid plates
Re: making skid plates
That is AWESOME!!!
Now can you make it powdercoated colors.
Now can you make it powdercoated colors.
Members don't see the above ad. Register now - it's free! | |
-
Toxygene - Established Member
- Posts: 1964
- Joined: Fri May 13, 2005 3:49 pm
- Location: Riverside, CA
Re: making skid plates
why ? does someone look under the car ?
Street ST185
Rally ST165
HillClimb Renault 5 GTE
Rally ST165
HillClimb Renault 5 GTE
-
BNZ - Club Member
- Posts: 321
- Images: 31
- Joined: Fri Oct 03, 2008 7:22 pm
- Location: Timisoara/Romania
Re: making skid plates
This was for the 165's right? Or was someone able to make one for the 185's cuz I'm looking to get one for my 185
91 Celica Alltrac - Parts pile pending instal 
3SGTE project motor very slow
Intake/Heat shield project slowly moving
Winnipegs respected TTI forum. join and love the community will welcome you with open arms and legs ? http://toptierimports.com/

3SGTE project motor very slow
Intake/Heat shield project slowly moving
Winnipegs respected TTI forum. join and love the community will welcome you with open arms and legs ? http://toptierimports.com/
-
celigts - Established Member
- Posts: 1660
- Images: 0
- Joined: Fri Feb 11, 2011 3:03 pm
Re: making skid plates
I made one for a 185 also,so i have the designs and can make more. The only difference is that is a bit longer and the front brackets are different.
Street ST185
Rally ST165
HillClimb Renault 5 GTE
Rally ST165
HillClimb Renault 5 GTE
-
BNZ - Club Member
- Posts: 321
- Images: 31
- Joined: Fri Oct 03, 2008 7:22 pm
- Location: Timisoara/Romania
Re: making skid plates
Could you post pictures by chance?
91 Celica Alltrac - Parts pile pending instal 
3SGTE project motor very slow
Intake/Heat shield project slowly moving
Winnipegs respected TTI forum. join and love the community will welcome you with open arms and legs ? http://toptierimports.com/

3SGTE project motor very slow
Intake/Heat shield project slowly moving
Winnipegs respected TTI forum. join and love the community will welcome you with open arms and legs ? http://toptierimports.com/
-
celigts - Established Member
- Posts: 1660
- Images: 0
- Joined: Fri Feb 11, 2011 3:03 pm
Re: making skid plates
I did not make any pictures of that particular one but is virtually identical with the one already posted above. There are only 2 small differences witch i also mentioned above.
Street ST185
Rally ST165
HillClimb Renault 5 GTE
Rally ST165
HillClimb Renault 5 GTE
-
BNZ - Club Member
- Posts: 321
- Images: 31
- Joined: Fri Oct 03, 2008 7:22 pm
- Location: Timisoara/Romania
Re: making skid plates
as of last weekend i finally got a chance to install mine.
I am very happy with the product. 100% bolt on(one spacer was lost in shipping but that was not a problem to large bolts did just fine). oil change hole, trans fluid change hole. perfect.
I will post details about everything in due time. but needless to say i am very happy.
one cell phone pic that i posted on FBook:

I am very happy with the product. 100% bolt on(one spacer was lost in shipping but that was not a problem to large bolts did just fine). oil change hole, trans fluid change hole. perfect.
I will post details about everything in due time. but needless to say i am very happy.
one cell phone pic that i posted on FBook:

-
LegacyofDan - GTFour God
- Posts: 3640
- Joined: Wed May 23, 2007 3:54 pm
Re: making skid plates
I'm glad it was all straight forward and thanks for the good feedback.
Also worth mentioning,the hole in the middle there is a hole for an extender pipe thing you need to fabricate in order to put on the jack and easy-lift the car. I will make pictures of mine when i make it.
Under the hole is the place you normally jack the car up
Also worth mentioning,the hole in the middle there is a hole for an extender pipe thing you need to fabricate in order to put on the jack and easy-lift the car. I will make pictures of mine when i make it.
Under the hole is the place you normally jack the car up
Street ST185
Rally ST165
HillClimb Renault 5 GTE
Rally ST165
HillClimb Renault 5 GTE
-
BNZ - Club Member
- Posts: 321
- Images: 31
- Joined: Fri Oct 03, 2008 7:22 pm
- Location: Timisoara/Romania
Re: making skid plates
Bumping this back up, any chance you'd be interested in selling a template for one of these? I've got a bunch of sheet stainless lying around but I'd prefer to take the guesswork out of the process.
★ 1991 GTFour RC ~ "Rebel Scum" ★
It's for sale! http://www.alltrac.net/phpBB2/viewtopic.php?f=64&t=52181
Build thread http://www.alltrac.net/phpBB2/viewtopic.php?f=44&t=44216
It's for sale! http://www.alltrac.net/phpBB2/viewtopic.php?f=64&t=52181
Build thread http://www.alltrac.net/phpBB2/viewtopic.php?f=44&t=44216
- underscore
- GTFour God
- Posts: 3888
- Images: 0
- Joined: Mon Apr 09, 2007 11:29 pm
- Location: Kelowna, BC
Who is online
Users browsing this forum: Google [Bot] and 2 guests