5x114.3 front and rear.

All of the information you need in one place.

Re: for 185/205 5x114.3 hub change - warning lots of pix(no

Postby tubasteve » Sun Mar 11, 2012 8:06 pm

Image
Image
Members don't see the above ad. Register now - it's free!
feb. 1990 alltrac red one: fun machine http://tinyurl.com/Tubasteve
5x114 conversion: http://tinyurl.com/nu3qnez
Image
User avatar
tubasteve
Established Member
 
Posts: 1149
Joined: Tue Apr 01, 2008 6:48 pm
Location: temecula, ca(951)

Re: for 185/205 5x114.3 hub change - warning lots of pix(no

Postby temperacerguy » Sun Mar 11, 2012 9:17 pm

Galaxy Quest.



Very sexy work. I like your "bolt on" approach.

This opens up alot for us.

Thank you!
the VIS hood group buy is now closed.... you missed out!
temperacerguy
Club Member
 
Posts: 273
Joined: Sat Oct 09, 2010 6:16 am

Re: for 185/205 5x114.3 hub change - warning lots of pix(no

Postby abraxxa » Sun Mar 11, 2012 9:52 pm

Are you sure this also works for the ST205 because the brake rotors are much larger and not floating.
facelift ST205
User avatar
abraxxa
Club Member
 
Posts: 537
Joined: Tue Oct 04, 2005 5:08 pm
Location: Vienna, Austria

Re: for 185/205 5x114.3 hub change - warning lots of pix(no

Postby tubasteve » Mon Mar 12, 2012 2:06 am

abraxxa wrote:Are you sure this also works for the ST205 because the brake rotors are much larger and not floating.



Must have gotten deleted? It was in red "brakes only work for 185".

I am currently working to solve st205/165 a well.
feb. 1990 alltrac red one: fun machine http://tinyurl.com/Tubasteve
5x114 conversion: http://tinyurl.com/nu3qnez
Image
User avatar
tubasteve
Established Member
 
Posts: 1149
Joined: Tue Apr 01, 2008 6:48 pm
Location: temecula, ca(951)

Re: for 185/205 5x114.3 hub change - warning lots of pix(no

Postby dragstang86 » Mon Mar 12, 2012 2:46 am

tubasteve wrote:
dragstang86 wrote:If you could also provide the I.D of the rear rotor, where the parking brake goes that would be a huge help. So in summary:

1. The rear rotor I.D. - parking brake
2. The rear rotor offset from hat face to rotor face
3. The Highlander hub diameter.

Thanks a bunch! :D



Damn it, i got sick last night and keep forgetting i have the numbers and pictures. I'll upload tonight.


Thanks for the pictures. The numbers would be great when you get a chance. Will help me figure out a Wilwood hat/rotor combination that I can use for the back with the Highlander hubs.
92 All trac
dragstang86
Club Member
 
Posts: 399
Joined: Tue May 10, 2011 4:49 am
Location: Severn, MD

Re: for 185/205 5x114.3 hub change - warning lots of pix(no

Postby tubasteve » Mon Mar 12, 2012 4:30 am

Yeah, forgot, wife got a call to goto dinner with her family. I get in early tomorrow, and I'll measure as much as i can
feb. 1990 alltrac red one: fun machine http://tinyurl.com/Tubasteve
5x114 conversion: http://tinyurl.com/nu3qnez
Image
User avatar
tubasteve
Established Member
 
Posts: 1149
Joined: Tue Apr 01, 2008 6:48 pm
Location: temecula, ca(951)

Re: for 185/205 5x114.3 hub change - warning lots of pix(no

Postby lumbercis » Mon Mar 12, 2012 5:29 am

Sorry, I think I need things spelled out a bit more clearly.

Fronts:
Spindle: ST185 unmodified
Hubs: Rav4 ????-????(years)
modifications needed: none
Rotor: (Front) Camry (any trim) 2002-2006 (based on this cross reference http://www.toyodiy.com/parts/xref?s=435 ... 6040&mU=on)
modifications needed: shave inside (hub side) of rotor -2.85mm. shave rotor diameter????
Brakes: ST185 unmodified

Rears:
Spindle: ST185 unmodified
Hubs: Highlander (any trim) 2001-2003, Lexus RX300 1999-2003
modifications: none
Rotors: (Rear) Highlander (any trim) 2001-2003, Lexus RX300 1999-2003
modifications: none
Brakes: ST185 unmodified
Parking brakes: ST185 or Highlander unmodified

Please correct as necessary.
J.
Caldina powered...
Image
lumbercis
Gold Member
 
Posts: 2346
Joined: Fri May 13, 2005 4:52 am
Location: Washington, D.C.

Re: for 185/205 5x114.3 hub change - warning lots of pix(no

Postby tubasteve » Mon Mar 12, 2012 4:36 pm

Fronts:
Spindle: ST185 unmodified
Hubs: Rav4 96-2000
modifications needed: none
Rotor: (Front) Camry (2.4/3.0) 2002-2006 (based on this cross reference http://www.toyodiy.com/parts/xref?s=435 ... 6040&mU=on)
modifications needed: shave inside (hub side) of rotor -2.85mm. shave rotor diameter not needed
Brakes: ST185 unmodified

Rears:
Spindle: ST185 unmodified
Hubs: Highlander (awd only) 2001-2003, Lexus RX300 1999-2003
modifications: none
Rotors: (Rear) Highlander (awd only) 2001-2003, Lexus RX300 1999-2003
modifications: none
Brakes: ST185 unmodified
Parking brakes: ST185/Highlander unmodified(are the same)
feb. 1990 alltrac red one: fun machine http://tinyurl.com/Tubasteve
5x114 conversion: http://tinyurl.com/nu3qnez
Image
User avatar
tubasteve
Established Member
 
Posts: 1149
Joined: Tue Apr 01, 2008 6:48 pm
Location: temecula, ca(951)

Re: for 185/205 5x114.3 hub change - warning lots of pix(no

Postby DeeCee » Tue Mar 13, 2012 7:26 am

Thought I'd just say, that this is a top notch conversion. I believe that is one that definitely took a little longer than normal to get right. Congratulations.

Of note, this now opens up the st205 front brake kit using the altezza/supra 296x32mm disc with standard caliper location. I think some investigation is required ;)
Of course this now renders the st205 rear caliper upgrade null, unless people don't mind redrilling the PCD and opening up the centre bore to fit the hub. It is possibly worth it as rear brake disc changes are minimal :)

Great work! This conversion will be spread worldwide i'm sure :)

Cheers
Dave
GT Four Adovansu "I want to enjoy the powerful and nimble agility behavior."

Image

Elephant: http://www.alltrac.net/phpBB2/viewtopic.php?t=26687
User avatar
DeeCee
Established Member
 
Posts: 1135
Joined: Mon Mar 24, 2008 8:41 am
Location: New Zealand

Re: for 185/205 5x114.3 hub change - warning lots of pix(no

Postby tubasteve » Tue Mar 13, 2012 8:41 pm

On the rears i'm looking into a bolt on rotor, just waiting for it to show up.
feb. 1990 alltrac red one: fun machine http://tinyurl.com/Tubasteve
5x114 conversion: http://tinyurl.com/nu3qnez
Image
User avatar
tubasteve
Established Member
 
Posts: 1149
Joined: Tue Apr 01, 2008 6:48 pm
Location: temecula, ca(951)

Re: for 185/205 5x114.3 hub change - warning lots of pix(no

Postby abraxxa » Tue Mar 13, 2012 9:36 pm

I don't want to lose my Endless rotors because of this :doh:
facelift ST205
User avatar
abraxxa
Club Member
 
Posts: 537
Joined: Tue Oct 04, 2005 5:08 pm
Location: Vienna, Austria

Re: for 185/205 5x114.3 hub change - warning lots of pix(no

Postby alltracshoak » Wed Mar 14, 2012 7:20 pm

so as reading...what needs to be changed is just the hub to make it 5x114.3 ..uses st185 bearings/axles/spindle but uses different rotors due to the changed from 5x100. if so, i believe it will be able to adapt to the porsche brembo due to the same location of everything besides the bolt pattern
current:
90 st185
GT4 AWD
Image
rip: 92 st185 @ 178k :(
User avatar
alltracshoak
Gold Member
 
Posts: 2638
Joined: Mon Oct 10, 2005 10:13 pm
Location: centralcal CA

Re: for 185/205 5x114.3 hub change - warning lots of pix(no

Postby CMS-GT4 » Wed Mar 14, 2012 7:54 pm

If your using sti rotors the issue is the center bore. You can buy the same sized sti discs in 5x114. This problem is the center bore is smaller. So either you machine that larger, or you get the spindles machines down.
Coldiron
92 st185 (205 swap) | 03 350Z Track (sold) | 13 Pilot | 17 Mazda3
www.noritoy.com | noritoy.deviantart.com | http://www.alltrac.net/phpBB2/viewtopic.php?f=44&t=19891
User avatar
CMS-GT4
GTSilver Member
 
Posts: 10336
Images: 7
Joined: Mon Aug 09, 2004 9:12 pm
Location: St Louis Area (IL)

1992 Toyota Celica

Re: for 185/205 5x114.3 hub change - warning lots of pix(no

Postby alltracshoak » Wed Mar 14, 2012 8:11 pm

So the rav 4 spindle has a bigger center hub than the st185???
Last edited by alltracshoak on Wed Mar 14, 2012 9:39 pm, edited 1 time in total.
current:
90 st185
GT4 AWD
Image
rip: 92 st185 @ 178k :(
User avatar
alltracshoak
Gold Member
 
Posts: 2638
Joined: Mon Oct 10, 2005 10:13 pm
Location: centralcal CA

Re: for 185/205 5x114.3 hub change - warning lots of pix(no

Postby tubasteve » Wed Mar 14, 2012 8:18 pm

Yes, i'm working on that with multiple members.
-Jr
feb. 1990 alltrac red one: fun machine http://tinyurl.com/Tubasteve
5x114 conversion: http://tinyurl.com/nu3qnez
Image
User avatar
tubasteve
Established Member
 
Posts: 1149
Joined: Tue Apr 01, 2008 6:48 pm
Location: temecula, ca(951)

PreviousNext

Return to FAQ / Archive

Who is online

Users browsing this forum: No registered users and 0 guests