temperacerguy
New member
OK, looks like I will be making these.
Let me finish a couple projects first, and I will start gathering items. (peal ply, infusion cloth, tack tape, resin, carbon fiber. etc)
I'm only going to make 10 of these, then I am going to ditch the mold. I don't have the space to store molds, so keep on the look-out for them.
The plan is to make this 5 layers thick. 2 layers of carbon fiber, then 3 layers of glass cloth. this will leave it at aprox. 1mm thick. I'm going to vacuum infuse these, which is a technique used for structural parts... It's total overkill for something like this, but if you're going to do something, you need to do it right.
It's going to follow the factory shape/contours. I will offer it in two styles. one with all the cutouts cutout, and one with the outline cutout, and you can cut out the holes you want on your own.
Let me finish a couple projects first, and I will start gathering items. (peal ply, infusion cloth, tack tape, resin, carbon fiber. etc)
I'm only going to make 10 of these, then I am going to ditch the mold. I don't have the space to store molds, so keep on the look-out for them.
The plan is to make this 5 layers thick. 2 layers of carbon fiber, then 3 layers of glass cloth. this will leave it at aprox. 1mm thick. I'm going to vacuum infuse these, which is a technique used for structural parts... It's total overkill for something like this, but if you're going to do something, you need to do it right.
It's going to follow the factory shape/contours. I will offer it in two styles. one with all the cutouts cutout, and one with the outline cutout, and you can cut out the holes you want on your own.