BRD st185 hoping for 400bhp now mapped at 397bhp 370ft/lbs

mixer72

New member
got my new replacement oil cooler today :)
2012-04-11175627.jpg


so will be fitting this tomorrow night or at the weekend
 

mixer72

New member
done a few bits to the car today. first I flushed then bled all the brake system with AP 600 :)


then I relocated the oil cool
here you can see were to oil cooler was before
20120519_163208.jpg

not much room for the air to get to it.

here it is now in its new home
20120519_172835.jpg

20120519_172829.jpg

20120519_181929.jpg


just go to plum it back in tomorrow :) I’m all so looking at fitting a small fan on the back of the oil cooler
 

mixer72

New member
hello all i have been doing some competing in the car over the last few months so here are a few photos and vidoes

rally day a castle combe
http://youtu.be/jWWlduo9SRo


some photos of me at Shelsley Walsh hill climbe

http://youtu.be/yQwB4uVIy28
http://youtu.be/hWGG-S6dZXk
http://youtu.be/qZPR_3KEBV4
http://youtu.be/GDdnxvZUmNU
http://youtu.be/GDdnxvZUmNU


first vide is of the second run on Saturday and the diff going not a very nice sound :(

http://youtu.be/4AFae4glET4

the Sundays first practices run

http://youtu.be/4TqdRcx7y4Y

second practices run in the wet

http://youtu.be/xHVovhY2slU

first competitive run

http://youtu.be/QuAgiopf81Y

winning run of the day 36.41sec
http://youtu.be/qq1Y2UbCOF0

https://www.youtube.com/watch?v=o3wn...e_gdata_player

https://www.youtube.com/watch?v=VjmR...e_gdata_player

last video and the winning run

http://youtu.be/-Zzfd-qo3v0
 

mixer72

New member
couple of photos of me cleaning it up ready to paint

20121008_204213.jpg

20121008_204143.jpg

20121008_204336.jpg

20121008_204324.jpg


and now it’s all read to fit into the car the weekend if the weather is good:)

20121008_204404.jpg

20121008_204410.jpg

20121008_204417.jpg


R/C Diff now fitted the the Beast

20121013_161536.jpg

20121013_161511.jpg
 

mixer72

New member
started to clean the rear arms read to Polly bush and powder coat, going to be doing all the rear arms in white and the sub frame in black

20121110_114657.jpg

20121110_114705.jpg


20121110_114718.jpg

20121110_121237.jpg


20121110_122922.jpg



20121110_121311.jpg

20121110_121306.jpg


20121110_134508.jpg

20121110_134512.jpg


just the sub frame left to do then off to powder coat

20121110_135612.jpg

241120121017.jpg


241120121018.jpg


241120121019.jpg


241120121020.jpg


241120121021.jpg


241120121023.jpg
 

mixer72

New member
thanks for all coments :)
took some more of the sound deadening out today and fitted new under plates for the rollcage




still more to come out but getting lighter






 

mixer72

New member
right so finished of the baffled sump to day





and I have all so added a crank breather to the sum to help get rid of the crank pressure


just need to give it all a good clean and paint the out side of the sump and it can be fitted



just finished the centre dash with new switches which will do power steering pump, fuel pump and launch control





just finished the centre dash with new switches which will do power steering pump, fuel pump and launch control

 
Top