Has anyone changed the CV Boot in the rear axles successfully, and if so, where did you get the part (and part # please if you have it)?
This is really frustrating: I ordered a CV Boot Kit for my ST185 from NAPA online, and they sent me boots that were way too small (about 3 inch in diameter) for both the inners and the outers.
So then I go to RockAuto and order boots specific to the ST185, and they are again too small (again, about 3 inches in diameter).
My car has been down for way too long, and this sort of delay is really bringing me down... I think I'm gonna have to break down and buy a Boot Kit from Toyota-- now, I looked at the Toyota Part Number Thread here, and also looking it up at ToyoDIY.com, I am a bit confused exactly what part number I need. Seems like the boot itself can be a separate part #, and the "kit" (assuming it's the boot + grease + clamps) have another part # but it doesn't differentiate between the inner and outer boots (they are clearly different on the stock old ones I took out).
Halp~~!! >< TIA~
This is really frustrating: I ordered a CV Boot Kit for my ST185 from NAPA online, and they sent me boots that were way too small (about 3 inch in diameter) for both the inners and the outers.
So then I go to RockAuto and order boots specific to the ST185, and they are again too small (again, about 3 inches in diameter).
My car has been down for way too long, and this sort of delay is really bringing me down... I think I'm gonna have to break down and buy a Boot Kit from Toyota-- now, I looked at the Toyota Part Number Thread here, and also looking it up at ToyoDIY.com, I am a bit confused exactly what part number I need. Seems like the boot itself can be a separate part #, and the "kit" (assuming it's the boot + grease + clamps) have another part # but it doesn't differentiate between the inner and outer boots (they are clearly different on the stock old ones I took out).
Halp~~!! >< TIA~