uprated viscous cupplings

Lets talk clutches and everything drivetrain related

Re: uprated viscous cupplings

Postby st185-sainz » Tue Jan 22, 2013 7:02 pm

hi,

I talked to my supplier and he said he should have them ready at the end of next week. So they should be shipped to you one week later. Unfortunately postal service from Austria to US is unpredictable and can take betwenn 5-15 business days...

mario
Members don't see the above ad. Register now - it's free!
Mario,
ST205 blue: completely stock
ST185CS (white): white - gravel/snow spec, dog box, TRD clutch, uprated turbo, lightened flywheel, uprated actuator, cold air intake, ST182 cams, walbro pump, batt relocation, forgies, programmable ECU (dyno), ...
User avatar
st185-sainz
Club Member
 
Posts: 191
Joined: Sun Aug 08, 2004 2:28 pm
Location: Austria

Re: uprated viscous cupplings

Postby BADNEWS » Tue Jan 22, 2013 7:23 pm

Thanks. That is all I needed.
90 ST185 W/ HTZ4094R (6768), 2.2, Fully Built
865AWHP, 591 torque
Hope to have some 1/4 times this summer of 2016!!!
User avatar
BADNEWS
Club Member
 
Posts: 671
Joined: Sun Oct 17, 2004 5:37 pm
Location: Milwaukee, WI

Re: uprated viscous cupplings

Postby mikahogl » Mon Feb 04, 2013 12:45 pm

Any more news about the vc:s?
Hope to install it soon
mikahogl
Newbie
 
Posts: 17
Joined: Mon Jun 25, 2012 1:18 pm

Re: uprated viscous cupplings

Postby BADNEWS » Thu Feb 07, 2013 1:37 am

mikahogl wrote:Any more news about the vc:s?
Hope to install it soon


Me too. I have my transmission all rebuilt, and the transfer case is all powder coated with new hardware ready to assemble. Once I get the viscous unit I should only need a couple hours to install it and check over everything.
90 ST185 W/ HTZ4094R (6768), 2.2, Fully Built
865AWHP, 591 torque
Hope to have some 1/4 times this summer of 2016!!!
User avatar
BADNEWS
Club Member
 
Posts: 671
Joined: Sun Oct 17, 2004 5:37 pm
Location: Milwaukee, WI

Re: uprated viscous cupplings

Postby st185-sainz » Thu Feb 07, 2013 5:49 am

hi,

I received the units these minutes!!! I was waiting for that to get some good news to you!

Everybody got an Email or PM to confirm his shipping address to my email. I would like to avoid mistakes and get the parts back after half a year...

thanks for you patience!!!

mario
Mario,
ST205 blue: completely stock
ST185CS (white): white - gravel/snow spec, dog box, TRD clutch, uprated turbo, lightened flywheel, uprated actuator, cold air intake, ST182 cams, walbro pump, batt relocation, forgies, programmable ECU (dyno), ...
User avatar
st185-sainz
Club Member
 
Posts: 191
Joined: Sun Aug 08, 2004 2:28 pm
Location: Austria

Re: uprated viscous cupplings

Postby BADNEWS » Thu Feb 07, 2013 10:27 am

Awesome! This is perfect timing for me. Thanks Mario!
90 ST185 W/ HTZ4094R (6768), 2.2, Fully Built
865AWHP, 591 torque
Hope to have some 1/4 times this summer of 2016!!!
User avatar
BADNEWS
Club Member
 
Posts: 671
Joined: Sun Oct 17, 2004 5:37 pm
Location: Milwaukee, WI

Re: uprated viscous cupplings

Postby BADNEWS » Sun Feb 24, 2013 1:42 pm

Received mine. Thanks Mario!!

Image
90 ST185 W/ HTZ4094R (6768), 2.2, Fully Built
865AWHP, 591 torque
Hope to have some 1/4 times this summer of 2016!!!
User avatar
BADNEWS
Club Member
 
Posts: 671
Joined: Sun Oct 17, 2004 5:37 pm
Location: Milwaukee, WI

Re: uprated viscous cupplings

Postby st185-sainz » Sun Feb 24, 2013 3:57 pm

good to hear that you received the unit! Mika received his as well already!

I have one unit available to be shipped immediately as one costumer from Europe did not pay.

The following list is still active:
#1: underscore
#2: ALLensTRAC
#3: MWP
#4: mikahogl (friend)
#5: thespen

Are those people still interested? What time this year are you planing to get the money?

@thespen: you mentioned that you would like to get yours earlier this year?

thanks
mario
Mario,
ST205 blue: completely stock
ST185CS (white): white - gravel/snow spec, dog box, TRD clutch, uprated turbo, lightened flywheel, uprated actuator, cold air intake, ST182 cams, walbro pump, batt relocation, forgies, programmable ECU (dyno), ...
User avatar
st185-sainz
Club Member
 
Posts: 191
Joined: Sun Aug 08, 2004 2:28 pm
Location: Austria

Re: uprated viscous cupplings

Postby underscore » Sun Feb 24, 2013 9:54 pm

It's unlikely I'll be able to get the money within this year.
★ 1991 GTFour RC ~ "Rebel Scum" ★
It's for sale! http://www.alltrac.net/phpBB2/viewtopic.php?f=64&t=52181
Build thread http://www.alltrac.net/phpBB2/viewtopic.php?f=44&t=44216
underscore
GTFour God
 
Posts: 3821
Images: 0
Joined: Mon Apr 09, 2007 11:29 pm
Location: Kelowna, BC

Re: uprated viscous cupplings

Postby MWP » Fri Mar 01, 2013 3:12 am

Yup, im still in for sometime this year.

Maybe July/Aug?
My collection of GT4 documentation: http://gt4.mwp.id.au
Daily: Celica GT4 ST185 (~170kw/atw)
Project: Toyota RA28 '77 Celica (1UZ-FE powered)
Chairman of the SA Classic Celica Club.
MWP
Established Member
 
Posts: 1599
Joined: Mon Jun 01, 2009 11:02 am
Location: Adelaide, South Australia

Re: uprated viscous cupplings

Postby donk2k » Fri Mar 08, 2013 8:42 pm

st185-sainz wrote:good to hear that you received the unit! Mika received his as well already!

I have one unit available to be shipped immediately as one costumer from Europe did not pay.

The following list is still active:
#1: underscore
#2: ALLensTRAC
#3: MWP
#4: mikahogl (friend)
#5: thespen

Are those people still interested? What time this year are you planing to get the money?

@thespen: you mentioned that you would like to get yours earlier this year?

thanks
mario


Price for that one shipped to norway?
And what stiffness is it set for?
Will I need to send you my std unit? (in that case how much time will I have to get it out and sent?)

-Espen-
donk2k
Newbie
 
Posts: 7
Joined: Wed May 19, 2010 2:19 pm

Re: uprated viscous cupplings

Postby st185-sainz » Wed Mar 20, 2013 7:22 pm

hi espen,

did you receive my PM?

thanks
mario
Mario,
ST205 blue: completely stock
ST185CS (white): white - gravel/snow spec, dog box, TRD clutch, uprated turbo, lightened flywheel, uprated actuator, cold air intake, ST182 cams, walbro pump, batt relocation, forgies, programmable ECU (dyno), ...
User avatar
st185-sainz
Club Member
 
Posts: 191
Joined: Sun Aug 08, 2004 2:28 pm
Location: Austria

Re: uprated viscous cupplings

Postby donk2k » Fri Apr 12, 2013 6:00 pm

Yes I did.
Will answer now.
donk2k
Newbie
 
Posts: 7
Joined: Wed May 19, 2010 2:19 pm

Re: uprated viscous cupplings

Postby bmt » Sat Apr 13, 2013 9:49 am

Just curious what are the torque settings on a unit if I still want to use the handbrake Mario?

I presume the 400nm is used for those that DONT want to do handbrake turns?

If you are one of the people that bought an uprated unit please let the rest of us know how good the unit works and the set up in your car, (Motor,box, power etc)

Cant tell from the picture, did they put a drain/fill screw in it? Or is that just a waste of time since everything has to be disassembled to clean all those plates?

Cheers!
Living the good life in New Zealand!!
bmt
Club Member
 
Posts: 201
Joined: Fri Feb 18, 2011 8:01 am

Re: uprated viscous cupplings

Postby BADNEWS » Sat Apr 13, 2013 12:25 pm

I asked for a higher rated one. They normally are all 350nm.
90 ST185 W/ HTZ4094R (6768), 2.2, Fully Built
865AWHP, 591 torque
Hope to have some 1/4 times this summer of 2016!!!
User avatar
BADNEWS
Club Member
 
Posts: 671
Joined: Sun Oct 17, 2004 5:37 pm
Location: Milwaukee, WI

PreviousNext

Return to Drivetrain Central

Who is online

Users browsing this forum: No registered users and 1 guest