I am almost done building a ss braided oil feed/return line for my 88 st165 with a stock 1st gen 3sgte and stock ct26 turbo.
here is the main site for the parts http://shopping.kinugawaturbo.com/
http://shopping.kinugawaturbo.com/turbo ... eturn.aspx
http://shopping.kinugawaturbo.com/braid ... ght12.aspx
http://shopping.kinugawaturbo.com/braid ... t12-1.aspx
http://shopping.kinugawaturbo.com/adapt ... rab-3.aspx
http://shopping.kinugawaturbo.com/oildr ... v2mr2.aspx
http://www.ebay.com/itm/Turbo-Oil-Feed- ... 0c&vxp=mtr
this is the web site i used for the kit, then the -10 an 90 degree fitting and the oil drain pan adapter is needed. the only thing else i need to figure out is the oil feed fitting. I am going to measure the banjo fitting on the oil cooler and try to find a new replacement that has a -4an end on it. If that does not work i will adapt the oe banjo piece to -4an.
here is the main site for the parts http://shopping.kinugawaturbo.com/
http://shopping.kinugawaturbo.com/turbo ... eturn.aspx
http://shopping.kinugawaturbo.com/braid ... ght12.aspx
http://shopping.kinugawaturbo.com/braid ... t12-1.aspx
http://shopping.kinugawaturbo.com/adapt ... rab-3.aspx
http://shopping.kinugawaturbo.com/oildr ... v2mr2.aspx
http://www.ebay.com/itm/Turbo-Oil-Feed- ... 0c&vxp=mtr
this is the web site i used for the kit, then the -10 an 90 degree fitting and the oil drain pan adapter is needed. the only thing else i need to figure out is the oil feed fitting. I am going to measure the banjo fitting on the oil cooler and try to find a new replacement that has a -4an end on it. If that does not work i will adapt the oe banjo piece to -4an.