st205 into st185 swap faq/ and parts compatibility

Q&A regarding engines, turbos, and intercoolers and power upgrades

Re: st205 into st185 swap faq/ and parts compatibility

Postby soarer.jzz30 » Fri Apr 04, 2014 9:24 pm

Has anyone addressed fact that there is a temp switch sensor in the 185 water neck that is not present in the 205 and is an inline switch for the a/c condensor fan.
Members don't see the above ad. Register now - it's free!
'97 Toyota Soarer 5speed(dd), '90 ST185(money pit)
my build thread: http://alltrac.net/phpBB2/viewtopic.php?f=44&t=38003
User avatar
soarer.jzz30
Club Member
 
Posts: 521
Joined: Tue May 05, 2009 8:55 pm
Location: Lusby,MD

Re: st205 into st185 swap faq/ and parts compatibility

Postby CMS-GT4 » Fri Apr 04, 2014 10:41 pm

Yep I brought it up in the ac swap thread. I plan on exploring it once I get time.
Coldiron
92 st185 (205 swap) | 03 350Z Track (sold) | 13 Pilot | 17 Mazda3
www.noritoy.com | noritoy.deviantart.com | http://www.alltrac.net/phpBB2/viewtopic.php?f=44&t=19891
User avatar
CMS-GT4
GTSilver Member
 
Posts: 10341
Images: 7
Joined: Mon Aug 09, 2004 9:12 pm
Location: St Louis Area (IL)

1992 Toyota Celica

Re: st205 into st185 swap faq/ and parts compatibility

Postby soarer.jzz30 » Sat Apr 05, 2014 1:40 am

Ill check my schematics as well. I still have sensor
'97 Toyota Soarer 5speed(dd), '90 ST185(money pit)
my build thread: http://alltrac.net/phpBB2/viewtopic.php?f=44&t=38003
User avatar
soarer.jzz30
Club Member
 
Posts: 521
Joined: Tue May 05, 2009 8:55 pm
Location: Lusby,MD

Re: st205 into st185 swap faq/ and parts compatibility

Postby CTechBlueDragon » Sun Apr 06, 2014 1:06 am

Well... I got all the wires going to the chassis labeled just by looking at the fuse box lid. I have a Chilton that has full wiring diagrams for the chassis and ecu so now I just have to read my book and connect those wires to the right ones on the fuse box. Pretty simple really. I went a little crazy and removed and unwrapped the entire front chassis harness and I am going to do a wire tuck and removing all the wiring for the ABS and AC systems leaves very few wires to figure out. This allows you to remove both of those relay boxes on the passenger side near the abs/ugly nasty dust grease collector brick. I think about the only thing I have to figure out on the engine harness is I think I need to scavenge the entire wiring for the cruise control and put it into the 205 harness... I do want to get that working as well. I am getting to the point with the wiring I am starting to memorize it and the wiring diagrams are making so much more sense to me! lol I am all self taught so don't laugh.
CTechBlueDragon
Club Member
 
Posts: 204
Images: 50
Joined: Sat Mar 17, 2012 1:12 am

Re: st205 into st185 swap faq/ and parts compatibility

Postby fhalperformance » Mon Apr 07, 2014 9:46 pm

Anyone have a picture of the map sensor & where its located on the harness from the st205. I seem to have misplaced mine or just cant see it anymore because it dropped down somewhere.
'93 trac - V6TT project.
'92 trac - RHD conversion coming.
'91 trac - 564awhp.
'90 trac - fab car/snow build coming.
'91 mr2 - parting out.
'00 celica gts - custom wide body.
'01 mr2 - crazy build in progress.
'04 ducati 999
'04 tacoma TRD - for sale
User avatar
fhalperformance
Club Member
 
Posts: 855
Joined: Wed Aug 10, 2005 8:02 pm
Location: utica, ny

Re: st205 into st185 swap faq/ and parts compatibility

Postby quieter » Tue Apr 08, 2014 3:20 pm

talkinb about the map sensor... do st205 engine clips come with them? if not then i guess i need to buy one?
1990 toyota ST185 with st205 goodies (scrapped)
2011 BMW 535xi M pack (daily)

-Simon
User avatar
quieter
Club Member
 
Posts: 469
Joined: Thu Sep 08, 2011 4:16 pm
Location: Montreal

Re: st205 into st185 swap faq/ and parts compatibility

Postby soarer.jzz30 » Tue Apr 08, 2014 4:11 pm

It's located to the right side of the strut bar just off center underneath it closer to the firewall. Should have a purple and silver sticker, three wires : red, brown, blue/red. Being, pim e2, and volt +5 that also ties to the tps
'97 Toyota Soarer 5speed(dd), '90 ST185(money pit)
my build thread: http://alltrac.net/phpBB2/viewtopic.php?f=44&t=38003
User avatar
soarer.jzz30
Club Member
 
Posts: 521
Joined: Tue May 05, 2009 8:55 pm
Location: Lusby,MD

Re: st205 into st185 swap faq/ and parts compatibility

Postby fhalperformance » Tue Apr 08, 2014 9:07 pm

The only sensor I have thats purple and silver is left of the intake manifold passenger side and says turbo press or sensor on it. Red, brown, grey-black. Only wires I have disconnected are 2 pin plugs x2. I don't know where my ac idle up is could it be with that sharing a bracket?
'93 trac - V6TT project.
'92 trac - RHD conversion coming.
'91 trac - 564awhp.
'90 trac - fab car/snow build coming.
'91 mr2 - parting out.
'00 celica gts - custom wide body.
'01 mr2 - crazy build in progress.
'04 ducati 999
'04 tacoma TRD - for sale
User avatar
fhalperformance
Club Member
 
Posts: 855
Joined: Wed Aug 10, 2005 8:02 pm
Location: utica, ny

Re: st205 into st185 swap faq/ and parts compatibility

Postby phattyduck » Wed Apr 09, 2014 4:41 pm

fhalperformance wrote:The only sensor I have thats purple and silver is left of the intake manifold passenger side and says turbo press or sensor on it. Red, brown, grey-black. Only wires I have disconnected are 2 pin plugs x2. I don't know where my ac idle up is could it be with that sharing a bracket?
That's the MAP sensor.

MAP sensor is up on the firewall, near the wiper motor. AC idle-up is near where the igniter/coil mounts, just towards the middle of the car.

Image

-Charlie
'89 Camry LE Alltrac 3S-GTE - SV25/ST205 hybrid
'99 4Runner SR5 4WD 5VZ-FE
Previous: '88 Camry LE Alltrac 3S-GE BEAMS, '90 Camry 3S-GTE, '90 Camry DX
User avatar
phattyduck
Established Member
 
Posts: 1045
Joined: Wed Dec 07, 2005 8:09 am
Location: Pasadena, CA

Re: st205 into st185 swap faq/ and parts compatibility

Postby fhalperformance » Wed Apr 09, 2014 11:00 pm

Here I was thinking they were separate sensors. Thanks for your help.
'93 trac - V6TT project.
'92 trac - RHD conversion coming.
'91 trac - 564awhp.
'90 trac - fab car/snow build coming.
'91 mr2 - parting out.
'00 celica gts - custom wide body.
'01 mr2 - crazy build in progress.
'04 ducati 999
'04 tacoma TRD - for sale
User avatar
fhalperformance
Club Member
 
Posts: 855
Joined: Wed Aug 10, 2005 8:02 pm
Location: utica, ny

Re: st205 into st185 swap faq/ and parts compatibility

Postby soarer.jzz30 » Thu Apr 10, 2014 5:18 am

My a/c idle up is right next to the wire harness inlet into the interior. Same place as yours up there but the 185 wiper motor is on the drivers side. It should have two vacuum lines off it running the firewall
'97 Toyota Soarer 5speed(dd), '90 ST185(money pit)
my build thread: http://alltrac.net/phpBB2/viewtopic.php?f=44&t=38003
User avatar
soarer.jzz30
Club Member
 
Posts: 521
Joined: Tue May 05, 2009 8:55 pm
Location: Lusby,MD

Re: st205 into st185 swap faq/ and parts compatibility

Postby fhalperformance » Thu Apr 10, 2014 3:18 pm

got a picture of the connector for the A/C idle up? Is it a two pin black plug? That's the only connector I have unaccounted for at this point.
'93 trac - V6TT project.
'92 trac - RHD conversion coming.
'91 trac - 564awhp.
'90 trac - fab car/snow build coming.
'91 mr2 - parting out.
'00 celica gts - custom wide body.
'01 mr2 - crazy build in progress.
'04 ducati 999
'04 tacoma TRD - for sale
User avatar
fhalperformance
Club Member
 
Posts: 855
Joined: Wed Aug 10, 2005 8:02 pm
Location: utica, ny

Re: st205 into st185 swap faq/ and parts compatibility

Postby soarer.jzz30 » Thu Apr 10, 2014 5:27 pm

Might be easier if you take a pic of the two connectors youre talking about
'97 Toyota Soarer 5speed(dd), '90 ST185(money pit)
my build thread: http://alltrac.net/phpBB2/viewtopic.php?f=44&t=38003
User avatar
soarer.jzz30
Club Member
 
Posts: 521
Joined: Tue May 05, 2009 8:55 pm
Location: Lusby,MD

Re: st205 into st185 swap faq/ and parts compatibility

Postby fhalperformance » Fri Apr 11, 2014 2:07 am

Would like connector identification of these:

Image
picture 1: 3 plugs near ECU plugs

Image
picture 2: 2 pin plug near coil/evap solenoid plug

Image
picture 3: white connector "inside car" on engine harness
'93 trac - V6TT project.
'92 trac - RHD conversion coming.
'91 trac - 564awhp.
'90 trac - fab car/snow build coming.
'91 mr2 - parting out.
'00 celica gts - custom wide body.
'01 mr2 - crazy build in progress.
'04 ducati 999
'04 tacoma TRD - for sale
User avatar
fhalperformance
Club Member
 
Posts: 855
Joined: Wed Aug 10, 2005 8:02 pm
Location: utica, ny

Re: st205 into st185 swap faq/ and parts compatibility

Postby soarer.jzz30 » Fri Apr 11, 2014 3:05 am

Do you have a pic with the wires on the other side as well
The first set of three are the ecu plugs. If the white plug has lots of brown wires and two exposed ones that lead to the knock sensor and the dizzy shielding its the main ground junction
'97 Toyota Soarer 5speed(dd), '90 ST185(money pit)
my build thread: http://alltrac.net/phpBB2/viewtopic.php?f=44&t=38003
User avatar
soarer.jzz30
Club Member
 
Posts: 521
Joined: Tue May 05, 2009 8:55 pm
Location: Lusby,MD

PreviousNext

Return to Performance and Power

Who is online

Users browsing this forum: No registered users and 2 guests