Over the course of the past nine months I've had my motor apart several times. Each time I've replaced the can seals. I've tried the seals with the metal ring on it and I've tried the all rubber felpro seals etc. Is there a trick to them or do I need to buy different seals? Thanks in advance.
Chronic cam seal leak?
- Thread starter Kswizzle
- Start date
FC Zach
Active member
I replaced mine while I had my engine out to do a clutch replacement and replace them with these: http://www.oreillyauto.com/site/c/d...ck=Search_02344_1274194_-1&pt=02344&ppt=C0026
I recall them distorting slightly while pressing them in place but I figured it would be ok, , I was wrong and had to replace them again but with the engine installed on the second round :shoots:
The replacement seals I used on the second attempt were the rubber type and haven't had a leak since.
I recall them distorting slightly while pressing them in place but I figured it would be ok, , I was wrong and had to replace them again but with the engine installed on the second round :shoots:
The replacement seals I used on the second attempt were the rubber type and haven't had a leak since.