What else should I replace while doing the clutch?

JDM GT Four, ST185RC and ST205.

What else should I replace while doing the clutch?

Postby Covenant239 » Tue Feb 02, 2016 10:41 pm

I'm doing the Clutch and flywheel on my ST185. what else should I replace while I'm in the area with the transmission off. I know I'm going to do the Rear main seal, what else?
Members don't see the above ad. Register now - it's free!
Covenant239
Newbie
 
Posts: 15
Joined: Mon Dec 28, 2015 11:06 pm
Location: Fort Myers, Florida

Re: What else should I replace while doing the clutch?

Postby yyonline » Wed Feb 03, 2016 7:39 am

Axle and prop shaft seals would be good to do while the transmission is out. On most cars the transmission input shaft seal is recommended, but that's not changeable on this transmission without opening up the transmission case.

Given that you have to pull the engine out to do this job, I'd consider doing a timing belt, cam/crank seals, and replacing the "hoses from hell". All of that is so much easier to access with the engine out of the car.
1992 Toyota Celica all-trac (the dream car)
1993 Toyota Celica ST (the efficient daily driver)
2012 Hyundai Genesis Coupe 3.8 Track (the fun daily driver)
yyonline
Club Member
 
Posts: 259
Joined: Mon Aug 11, 2014 2:02 am
Location: Pennsylvania, USA

1992 Toyota Celica

Re: What else should I replace while doing the clutch?

Postby 94 MR2 Turbo » Wed Feb 03, 2016 8:04 am

You don't have to pull the engine.. It just takes some finesse. I just did mine just change out your rear main and put In a good hassle free clutch. Also take out the control are it frees up some space. It still sucks either way.
94 MR2 Turbo
Club Member
 
Posts: 277
Joined: Sun Oct 26, 2008 5:43 pm
Location: Frisco CA

Re: What else should I replace while doing the clutch?

Postby Covenant239 » Wed Feb 03, 2016 11:48 pm

ok, Thanks for the input.
Covenant239
Newbie
 
Posts: 15
Joined: Mon Dec 28, 2015 11:06 pm
Location: Fort Myers, Florida

Re: What else should I replace while doing the clutch?

Postby CTechBlueDragon » Thu Feb 04, 2016 3:16 pm

Replace the engine with a Caldina engine! HAHA
No seriously though, do it. =D
CTechBlueDragon
Club Member
 
Posts: 204
Images: 50
Joined: Sat Mar 17, 2012 1:12 am


Return to GT Four Chat

Who is online

Users browsing this forum: No registered users and 2 guests