The ST185 wheel size thread (offsets, widths, etc)

Suspension and other discussion

Re: The ST185 wheel size thread (offsets, widths, etc)

Postby Quark » Fri Jun 17, 2016 2:09 pm

Hi guys..

10x17 et30 rear (spacer?)

8.5x17 et30 front (spacer? )

Can I make these wheels fit? Will roll fenders.
Members don't see the above ad. Register now - it's free!
Quark
Club Member
 
Posts: 62
Joined: Wed Jan 21, 2009 1:28 pm

Re: The ST185 wheel size thread (offsets, widths, etc)

Postby magnum » Fri Jun 17, 2016 4:54 pm

none in front 15mm in back
User avatar
magnum
Club Member
 
Posts: 519
Joined: Wed Jun 06, 2007 1:09 pm
Location: Warman SK. Canada

1990 Toyota Celica

Re: The ST185 wheel size thread (offsets, widths, etc)

Postby Quark » Fri Jun 17, 2016 6:24 pm

So they will fit with a 15mm spacer in the back.
Quark
Club Member
 
Posts: 62
Joined: Wed Jan 21, 2009 1:28 pm

Re: The ST185 wheel size thread (offsets, widths, etc)

Postby soarer.jzz30 » Fri Jun 17, 2016 6:46 pm

Image

Thought this was relevant.
18x10+12 square 265/35
No spacers here.

Sent from my XT1585 using Tapatalk
'97 Toyota Soarer 5speed(dd), '90 ST185(money pit)
my build thread: http://alltrac.net/phpBB2/viewtopic.php?f=44&t=38003
User avatar
soarer.jzz30
Club Member
 
Posts: 521
Joined: Tue May 05, 2009 8:55 pm
Location: Lusby,MD

Re: The ST185 wheel size thread (offsets, widths, etc)

Postby abraxxa » Fri Jun 17, 2016 7:06 pm

10J fit the ST185 front axle???
Bonkers!!!
Whats the offset?
facelift ST205
User avatar
abraxxa
Club Member
 
Posts: 541
Joined: Tue Oct 04, 2005 5:08 pm
Location: Vienna, Austria

Re: The ST185 wheel size thread (offsets, widths, etc)

Postby soarer.jzz30 » Fri Jun 17, 2016 7:42 pm

So far I've got full lockout and no rub at all, took awhile to adjust and roll/pull the fenders to make it work,
As mentioned before they are ;
18x10 (+12)
It isn't lowered much tbh, maybe 2 inches so everything sits nice.
I will likely go 245/40 next set of tires so I can get another inch drop.

Image
Image
On some trash Chinese tires atm just to get the fit right and while it sits waiting for another swap I figure I'd get it closer to done.

Sent from my XT1585 using Tapatalk
'97 Toyota Soarer 5speed(dd), '90 ST185(money pit)
my build thread: http://alltrac.net/phpBB2/viewtopic.php?f=44&t=38003
User avatar
soarer.jzz30
Club Member
 
Posts: 521
Joined: Tue May 05, 2009 8:55 pm
Location: Lusby,MD

Re: The ST185 wheel size thread (offsets, widths, etc)

Postby ST185l » Sat Oct 22, 2016 7:12 pm

a photo with Compomotive TH3, I searched the post and google but I have not found

Thank you
ST185l
Newbie
 
Posts: 17
Joined: Wed May 04, 2016 6:06 pm

Re: The ST185 wheel size thread (offsets, widths, etc)

Postby freddie » Mon Oct 24, 2016 12:55 am

What about the plastic guard liners?

My front wheels do not rub on the guards, but rub on the plastic guard liners when cornering hard and a bump. The ares is where the liner curves from horizontal to vertical and fits onto the steel guard.

So what do you do?
a) Remove and throw away the plastic liner?
b) Cut and modify the liner some how?
c) Don't worry about it, ignore the noise it makes when it rubs and wait for the tire to rub a hole through it? lol
freddie
Club Member
 
Posts: 74
Joined: Mon Jan 23, 2012 9:20 am

Re: The ST185 wheel size thread (offsets, widths, etc)

Postby underscore » Mon Oct 24, 2016 2:09 am

^ the technical term for option C is "self clearancing" :wink:
★ 1991 GTFour RC ~ "Rebel Scum" ★
It's for sale! http://www.alltrac.net/phpBB2/viewtopic.php?f=64&t=52181
Build thread http://www.alltrac.net/phpBB2/viewtopic.php?f=44&t=44216
underscore
GTFour God
 
Posts: 3820
Images: 0
Joined: Mon Apr 09, 2007 11:29 pm
Location: Kelowna, BC

Re: The ST185 wheel size thread (offsets, widths, etc)

Postby CMS-GT4 » Mon Oct 24, 2016 12:27 pm

I bought a second liner then uses pieces and a plastic welder to increase the size of the liners.
Coldiron
92 st185 (205 swap) | 03 350Z Track (sold) | 13 Pilot | 17 Mazda3
www.noritoy.com | noritoy.deviantart.com | http://www.alltrac.net/phpBB2/viewtopic.php?f=44&t=19891
User avatar
CMS-GT4
GTSilver Member
 
Posts: 10345
Images: 7
Joined: Mon Aug 09, 2004 9:12 pm
Location: St Louis Area (IL)

1992 Toyota Celica

Re: The ST185 wheel size thread (offsets, widths, etc)

Postby xbeatxdownx » Sat Oct 29, 2016 2:50 pm

Can anyone identify this wheel and tire set up for me?

http://3.bp.blogspot.com/-rS355nhNeMA/U ... r-sale.jpg

Thanks!
xbeatxdownx
Newbie
 
Posts: 9
Joined: Thu Jun 25, 2015 1:14 am

Re: The ST185 wheel size thread (offsets, widths, etc)

Postby CSAlltrac » Sat Oct 29, 2016 6:38 pm

xbeatxdownx wrote:Can anyone identify this wheel and tire set up for me?

http://3.bp.blogspot.com/-rS355nhNeMA/U ... r-sale.jpg

Thanks!

That car was on bring a trailer not too long ago. Search "Celica" on that site and you will find the car. Should have some more pics. They look like a compomitive or a Sparco wheel.
ALLTRAC AT FIRST SIGHT
User avatar
CSAlltrac
Established Member
 
Posts: 2029
Joined: Fri May 05, 2006 1:47 pm
Location: ATX

Re: The ST185 wheel size thread (offsets, widths, etc)

Postby xbeatxdownx » Sun Oct 30, 2016 9:55 pm

CSAlltrac wrote:
xbeatxdownx wrote:Can anyone identify this wheel and tire set up for me?

http://3.bp.blogspot.com/-rS355nhNeMA/U ... r-sale.jpg

Thanks!

That car was on bring a trailer not too long ago. Search "Celica" on that site and you will find the car. Should have some more pics. They look like a compomitive or a Sparco wheel.


That's actually where I ran across the picture in the first place. Reverse google imaged it and so fourth, but didn't have too much luck locating any information on it (the seller posted about ten words when trying to sell it).

While looking at the compomitive site, it looks like the probably came from them, but tire size is more what I like on it.

Thanks for your help.
xbeatxdownx
Newbie
 
Posts: 9
Joined: Thu Jun 25, 2015 1:14 am

Re: The ST185 wheel size thread (offsets, widths, etc)

Postby sprocke7 » Mon Dec 19, 2016 5:15 am

Hey guys,

New here and I've tried my best to read and find the answers before posting about fitment and found no definitive answer.

Will 17x9 [+35mm] wheel size clear front and rear? What tires specs would fit without rubbing?
sprocke7
Newbie
 
Posts: 10
Joined: Thu Nov 10, 2016 8:11 pm

Re: The ST185 wheel size thread (offsets, widths, etc)

Postby ST185 Freak » Thu Jan 12, 2017 5:58 pm

Hi!

Will 17x9 +25 without spacers work in the rear?
I´ll mount 235/40R17 on them.
Fenders are minimal tilted, TEIN SuperStreet already is mounted (35mm lowered to stock).

Hope for answer, I already bought them :smokes:
User avatar
ST185 Freak
Newbie
 
Posts: 5
Joined: Mon Feb 06, 2012 5:55 am

PreviousNext

Return to Handling and Braking

Who is online

Users browsing this forum: No registered users and 1 guest