ATX CS.

CSAlltrac

New member
underscore":341h4goo said:
Those are beautiful! How much did they run if you don't mind me asking?
This kit will set you back about $1800. There's a ton of options all of them bigger except one smaller option.
 

FC Zach

Active member
fussellbug":22zlc36i said:
The internal cooling vanes (between the front and back faces of the rotor) determine the correct direction for rotor rotation.

https://www.zeckhausen.com/catalog/index.php?cPath=6446_6515

I knew that was important but never stopped to think that the internal vanes could go opposite direction of the slots/holes

fussellbug":22zlc36i said:
The direction of the slots on the face of the rotor does not matter for the proper direction of rotation.

Noted, thanks!
 

FC Zach

Active member
FC Zach":2j4opwon said:
I knew that was important but never stopped to think that the internal vanes could go opposite direction of the slots/holes

With that being said. . I need to double check my rotors LOL :)
 

CSAlltrac

New member
So as you can see I am a victim of the photobucket ransom. I do apologize guys, pretty much makes my whole build thread suck. I know Im not the only one that is highly upset.
 

CSAlltrac

New member
Photo Dump. Also, Screw Photobucket

TyiI4iE.jpg

bSd6Rpj.jpg

WKuRu6l.jpg
 
Top